Ford 2006 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 284)

Stowing the spare tire

1. Lay the tire on the ground, near the rear of the vehicle, with the valve

stem side facing up.

2. Slide the wheel partially under

the vehicle and install the retainer

through the wheel center. After

doing so, pull on the cable to align

the components at the end of the

cable.

3. Assemble the jack handle and

winch extension (as shown in

illustration), then insert the winch

extension through the access hole

behind the 3rd row seat and engage

the winch.

4. Turn the jack handle clockwise

until the tire is raised to its stowed

position underneath the vehicle. The

wrench will become harder to turn and the spare tire winch will ratchet

or slip when the tire is raised to maximum tightness. A clicking sound

will be heard from the winch indicating that the tire is properly stowed.

5. Disassemble the tools and snap them back into the tool tray. Close the

access hole with the rubber plug. Reinstall the tray into the vehicle and

secure it with the wing nut (turn clockwise until tight).

WHEEL LUG NUT TORQUE SPECIFICATIONS

Retighten the lug nuts to the specified torque at 500 miles (800 km)

after any wheel disturbance (tire rotation, changing a flat tire, wheel

removal, etc.).

Bolt size Wheel lug nut torque*

lb.ft. N•m

M14 x 2.0 150 200

* Torque specifications are for nut and bolt threads free of dirt and

rust. Use only Ford recommended replacement fasteners.

2006 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

284

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 359 360

Pas de commentaire

Ford 2006 Expedition v.1 Manuel d'utilisateur Page 284