Ford 2006 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 100)

100

101

6. Pull off the bulb covers.

7. Once the bulb covers are

removed, the bulbs can be removed

by turning them counterclockwise

and then pulling the bulbs straight

out.

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

8. Insert the glass end of the new bulb into the headlamp assembly.

When the grooves in the plastic base are aligned, turn the new bulb

clockwise to install.

9. Reinstall the bulb covers.

10. Replace the headlamp assembly and tighten all three retainer bolts to

secure.

Replacing HID headlamp bulbs (if equipped)

The low beam headlamps on your vehicle use a “high intensity discharge”

source. These lamps operate at a high voltage. The bulb is NOT

replaceable. When the bulb is burned out, the lamp assembly must be

replaced by your authorized dealer.

2006 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

100

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 359 360

Commentaires sur ces manuels

Pas de commentaire

Ford 2006 Expedition v.1 Manuel d'utilisateur Page 100

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2006 Expedition v.1