Ford 2006 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 337)

You can check the fluid without driving if the ambient temperature is

above 50°F (10°C). However, if fluid is added at this time, an overfill

condition could result when the vehicle reaches normal operating

temperature.

The transmission fluid should be in

this range if at normal operating

temperature (150°F-170°F

[66°C-77°C]).

The transmission fluid should be in

this range if at ambient temperature

(50°F-95°F [10°C-35°C]).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 mL) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of

transmission fluid may cause shift and/or engagement concerns

and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

ADD COLD HOT DO NOT ADD

2006 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

337

1 2 ... 332 333 334 335 336 337 338 339 340 341 342 ... 359 360

Pas de commentaire

Ford 2006 Expedition v.1 Manuel d'utilisateur Page 337