Ford 2005 Crown Victoria v.3 Manuel d'utilisateur télécharger pdf (Page 173)

Parking brake with auto-release (if equipped)

Apply the parking brake whenever

the vehicle is parked.

To set the parking brake:

1. Move the gearshift to P (Park).

2. Push pedal downward.

The BRAKE warning lamp in the

instrument cluster illuminates and

remains illuminated (when the

ignition is turned ON) until the

parking brake is fully released.

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the OFF/LOCK position

and remove the key whenever you leave your vehicle.

The parking brake is not recommended to stop a moving vehicle.

However, if the normal brakes fail, the parking brake can be used to stop

your vehicle in an emergency. Since the parking brake applies only the

rear brakes, the vehicle’s stopping distance will increase greatly and the

handling of your vehicle will be adversely affected.

Your vehicle may be equipped with an automatic parking brake release.

To release the parking brake:

1. Start the vehicle.

2. Press the brake pedal.

3. Move the gearshift from the P (Park) position to one of the forward

gears (the parking brake will not release automatically when you shift

into reverse). The brake pedal must remain pressed while the gearshift is

moved.

HOO

BRAKE

2005 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

173

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 263 264

Pas de commentaire

Ford 2005 Crown Victoria v.3 Manuel d'utilisateur Page 173