Ford 2004 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 172)

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if

the safety belt assembly “automatic locking retractor” feature or

any other safety belt function is not operating properly. In addition, all

safety belts should be checked for proper function. Failure to replace

the belt and retractor assembly could increase the risk of injury in

collisions.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

right front passenger seating positions.

The safety belt pretensioner removes some slack from the safety belt

system at the start of a crash. The safety belt pretensioner uses the

same crash sensor system as the front airbags and Safety Canopy娂

system. When the safety belt pretensioner deploys, the lap and shoulder

belt are tightened.

When the Safety Canopy娂 system and/or the front airbags are activated,

the safety belt pretensioners for the driver and right front passenger

seating positions will be activated when the respective seatbelt is

properly buckled.

The driver and the right front passenger seat belt system

(including retractors, buckles and height adjusters) must be

replaced if the vehicle is involved in a collision that results in

deployment of front air bags or Safety Canopy娂 and safety belt

pretensioners.

Refer to the Safety belt maintenance section in this chapter.

2004 Expedition (exd)

Owners Guide (post-2002-fmt)

USA English (fus)

Seating and Safety Restraints

172

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 359 360

Pas de commentaire

Ford 2004 Expedition v.3 Manuel d'utilisateur Page 172