Ford 2004 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 100)

100

101

Replacing license plate lamp bulb

The license plate bulbs are located in the license plate housing assembly

on the liftgate. To change the license plate bulbs:

1. Make sure the headlamp switch is

in the OFF position.

2. Remove the license lamp screw

from the assembly.

3. Pull the lamp down and twist the

bulb socket counterclockwise.

Remove the bulb socket from the

lamp.

4. Pull out the old bulb and push in

the new bulb.

5. Install the bulb socket in the lamp assembly by turning it clockwise.

6. Install the lamp assembly and secure it with the retaining screw.

Approach lamp/mirror turn signal bulb removal (if equipped)

To change the bulbs:

1. Make sure the headlamp switch is

in the OFF position and then fold

the mirror forward.

2. Remove the torx screw on the

bottom of the turn signal lens using

a T-10 torx driver.

3. Pull the turn signal lens down to

remove it from the mirror assembly

4. Disconnect the bulb assembly

from the lens.

5. Remove and replace the bulb.

6. Reverse the order to reassemble lamp and lens.

2004 Expedition (exd)

Owners Guide (post-2002-fmt)

USA English (fus)

Lights

100

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 359 360

Commentaires sur ces manuels

Pas de commentaire

Ford 2004 Expedition v.3 Manuel d'utilisateur Page 100

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2004 Expedition v.3