Ford 2004 F-150 v.2 Manuel d'utilisateur

Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 15Entertainment Systems 18AM/FM stereo 18AM/FM stereo with CD 20AM/FM stereo ca

WARNING LIGHTS AND CHIMESBase instrument clusterBase with Tachometer instrument clusterMid instrument cluster2004 F150 (f12)Owners Guide (post-2002-fm

Using the manual lumbar supportFor more lumbar support, turn thelumbar support control toward thefront of vehicle.For less lumbar support, turn thelum

Press the control to move the seatforward, backward, up or down.Memory seats/adjustable pedals (if equipped)This system allows automaticpositioning of

REAR SEATSHead restraintsThe purpose of these head restraints is to help limit head motion in theevent of a rear collision. To properly adjust your he

1. Pull control to release seatcushion.2. Rotate seat cushion up until itlocks into vertical storage position.Returning the seat to seating positionAl

• Restraints Control Module (RCM) with impact and safing sensors.• Restraint system warning light and back-up tone.• The electrical wiring for the air

position. The system is designed to help protect smaller drivers sittingclose to the driver air bag by providing a lower air bag output level.Front pa

allows your Personal Safety System to tailor the air bag deployment andsafety belt pretensioner activation depending upon safety belt usage.Refer to S

If any of these things happen, even intermittently, have the PersonalSafety System serviced at your dealership or by a qualified technicianimmediately

Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.Safety belts and seats can becom

• Front seats• Rear seats (if equipped)Energy management retractorsYour vehicle has a seat belt system equipped with energy managementretractors at th

Luxury instrument clusterWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa

The front seat belt system can also be made to lock manually by quicklypulling on the shoulder belt. Rear seat belts (if equipped) cannot bemade to lo

2. Grasp the shoulder portion andpull downward until the entire beltis extracted.3. Allow the belt to retract. As the belt retracts, you will hear a c

Safety belt pretensionerYour vehicle is equipped with safety belt buckle pretensioners at thedriver and front outboard passenger seating positions.Do

Front safety belt height adjustment (if equipped)Your vehicle has safety belt heightadjustments for the driver and rightfront passenger. Adjust the he

Insert the tongue into the correctbuckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen the belt, turn thetongue at a righ

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h

Reasons given... Consider...“Crashes are rare events” 36700 crashes occur every day. Themore we drive, the more we areexposed to “rare” events, even f

Reasons given... Consider...“I have an air bag” Air bags offer greater protection whenused with safety belts. Frontal airbagsare not designed to infla

To reduce the risk of injury, do not deactivate/activate the BeltMinder feature while driving the vehicle.1. Turn the ignition switch to the RUN (or O

On vehicles equipped with a message center, “ENGINE FAILSAFEMODE” will be displayed, refer to Message Center in the DriverControls chapter.Brake syste

Safety belt maintenanceInspect the safety belt systems periodically to make sure they workproperly and are not damaged. Inspect the safety belts to ma

The air bag supplemental restraint system consists of:• driver and passenger dual stage air bag modules (which include theinflators and air bags).• on

The National Highway Traffic Safety Administration (NHTSA)recommends a minimum distance of at least 25 cm (10 inches)between an occupant’s chest and t

Modifying or adding equipment to the front end of the vehicle(including frame, bumper, front end body structure and towhooks) may affect the performan

How does the air bag supplemental restraint system work?The air bag SRS is designed toactivate when the vehicle sustainssufficient longitudinal decele

If the air bag has deployed, the air bag will not functionagain and must be replaced immediately. If the air bag is notreplaced, the unrepaired area w

The front passenger sensing system is designed to meet the regulatoryrequirements of Federal Motor Vehicle Safety Standard (FMVSS) 208and is designed

The indicator light is located in the center stack of the instrument paneljust above the radio.The front passenger sensing system is designed to turn

Vehicles without rear seats areequipped with an Airbag On/Offswitch, which will override thedecision from the passenger sensingsystem when turned to O

If it is necessary to modify an advanced front air bag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center a

Charging system: Illuminates whenthe battery is not charging properly.Door ajar: Illuminates when theignition is in the ON position andany door is ope

2. When the ignition is turned to theON position the “passenger airbagoff” indicator light illuminatesbriefly, momentarily shuts off andthen turns bac

The safety belts for the driver and right front passenger seatingpositions have been specifically designed to function togetherwith the air bags in ce

• the infant has a medical condition which, according to the infant’sphysician, makes it necessary for the infant to ride in the front so thatthe driv

3. Medical condition: A passenger has a medical condition that,according to his or her physician:• poses a special risk for the passenger if the air b

Do not leave children, unreliable adults, or pets unattended inyour vehicle.Child booster seatsChildren outgrow a typical convertible or toddler seat

Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi

Follow all instructions provided by the manufacturer of thebooster seat.Never put the shoulder belt under a child’s arm or behind theback because it e

• Place seat back in upright position.• Put the safety belt in the automatic locking mode. Refer to Automaticlocking mode (passenger side front seatin

1. Position the child safety seat in aseat with a combination lap andshoulder belt.2. Pull down on the shoulder beltand then grasp the shoulder beltan

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear

MINI MESSAGE CENTER WARNING DISPLAYS (IF EQUIPPED)Door ajar: Displays when theignition is in the ON position andany door is open.Low fuel: Displays wh

8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly move the seat forwardand back to m

7. Before placing the child into the child seat, forcibly tilt the child seatfrom side to side and in forward direction to make sure that the seat ish

• F150 SuperCrew and SuperCabFront seat tether strap attachment1. Position the child safety seat on the seat cushion.2. Route the child safety seat te

• Front seat Regular Cab center(located on back panel)If the tether strap is clippedincorrectly, the child safetyseat may not be retained properlyin t

Rear seat tether strap attachmentThere are three loops of webbingjust above the back of the rear seat(along the bottom edge of the rearwindow) in the

3. Install the child safety seat tightlyusing the LATCH anchors or safetybelts. Follow the instructions in thischapter.4. Tighten the tether strapacco

Connectors on the LATCH child seatand the child seat instructions mayuse the symbol shown here. Yourvehicle seat may have plain buttons,instead of thi

Installing LATCH seats (Regular Cab)When you install a child seat on the front passenger seat of aRegular Cab, turn the Passenger Airbag On/Off switch

STARTINGPositions of the ignition1. OFF/LOCK, locks the steeringwheel, automatic transmissiongearshift lever and allows keyremoval.Note: The ignition

Do not start your vehicle in a closed garage or in other enclosedareas. Exhaust fumes can be toxic. Always open the garage doorbefore you start the en

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

4. Make sure the parking brake isset.5. Turn the key to 3 (ON) withoutturning the key to 4 (START).BRAKE43212004 F150 (f12)Owners Guide (post-2002-fmt

Make sure the corresponding lights illuminate or illuminate briefly. If alight fails to illuminate, have the vehicle serviced.• If the driver’s safety

Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START). Ifthere is difficulty in turning the key,rotate the steering wheel u

BRAKESOccasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, the brake linings may be worn-o

Parking brakeTo set the parking brake (1), pressthe parking brake pedal down untilthe pedal stops.To release, pull the lever (2).Always set the parkin

A high crown in the road or high crosswinds may also make the steeringseem to wander/pull.TRACTION-LOK AXLE (IF EQUIPPED)This axle provides added trac

If you cannot move the gearshift lever out of P (Park) with ignition inthe ON position and the brake pedal depressed, it is possible that a fusehas bl

If you cannot move the gearshift lever out of P (Park) with ignition inthe ON position and the brake pedal depressed, it is possible that a fusehas bl

Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position andremove the key wheneve

To put your vehicle in gear:• Start the engine• Depress the brake pedal• Move the gearshift lever into the desired gear• Release the parking brake.To

• With Full Message CenterRefer to Message Center in theDrivers Controls chapter on how toswitch the display from Metric toEnglish.Trip odometer: Regi

• Column-shift transmission• Floor-shift transmissionThe transmission control indicator (TCIL) will illuminate on theinstrument cluster.• Mini message

• O/D (Overdrive) is automatically returned each time the key is turnedoff.2 (Second)This position allows for second gear only.• Provides engine braki

REVERSE SENSING SYSTEM (IF EQUIPPED)The Reverse Sensing System (RSS) sounds a tone to warn the driver ofobstacles near the rear bumper when the R (Rev

The RSS detects obstacles up to 2meters (6 ft.) from the rear bumperwith a decreased coverage area atthe outer corners of the bumper,(refer to the fig

If your vehicle sustains damage to the rear bumper/fascia, leavingit misaligned or bent, the sensing zone may be altered causinginaccurate measurement

N (Neutral) – No power to either front or rear wheels.4L (4WD Low)– Uses extra gearing to provide maximum power to allfour wheels at reduced speeds. I

Do not leave the vehicle unattended with the transfer case in theN (Neutral) position. Always set the parking brake fully and turnoff the ignition whe

3. On vehicles equipped with an automatic transmission, place thetransmission in N (Neutral); on vehicles equipped with a manualtransmission, depress

• Be extremely careful when driving on pavement made slippery byloose sand, water, gravel, snow or ice.If your vehicle goes off the edge of the paveme

Emergency maneuvers• In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle, i.e.,

Engine oil pressure gauge:Indicates engine oil pressure. Theneedle should stay in the normaloperating range (between “L” and“H”). If the needle falls

If the parking brake is fully released, but the brake warning lampremains illuminated, the brakes may not be working properly.See your dealer or a qua

Mud and waterIf you must drive through highwater, drive slowly. Traction orbrake capability may be limited.When driving through water,determine the de

Driving on hilly or sloping terrainAlthough natural obstacles may make it necessary to travel diagonally upor down a hill or steep incline, you should

Driving on snow and ice4WD vehicles have advantages over 2WD vehicles in snow and ice butcan skid like any other vehicle.Should you start to slide whi

Do not use “aftermarket lift kits” or other suspension modifications,whether or not they are used with larger tires and wheels.These “aftermarket lift

Any modifications to a vehicle that raise the center of gravity can makeit more likely the vehicle will roll over as a result of a loss of control.For

Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue loador king pin w

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

10–15% (conventional trailer) or king pin weight of 15–25% (fifth wheeltrailer), and driver only (68 kg [150 lbs]). Consult your dealership (orthe RV

Calculating the load your vehicle can carry/tow1. Use the appropriate maximum GCWR chart (in the Trailer Towingsection in this chapter) for your type

FORD AM/FM STEREO SYSTEM (IF EQUIPPED)1./ Tune: Press to manuallygo up or down the radio frequency.Also use in menu mode to selectvarious settings.2.

Regular Cab 4x2 (126” wheelbase)Engine Rear axleratioMaximumGCWR-kg(lbs.)Maximumtrailerweight-kg(lbs.)4.6L 3.55 5216 (11500) 2948 (6500)4.6L 3.73 5443

Regular Cab 4x4 (145” wheelbase)Engine Rear axleratioMaximumGCWR-kg(lbs.)Maximumtrailerweight-kg(lbs.)4.6L 3.55 5307 (11700) 2812 (6200)4.6L 3.73 5534

SuperCab 4x2 (145” wheelbase)Engine Rear axleratioMaximumGCWR-kg(lbs.)Maximumtrailerweight-kg(lbs.)4.6L 3.55 5307 (11700) 2858 (6300)4.6L 3.73 5534 (1

SuperCab 4x4 (145” wheelbase)Engine Rear axleratioMaximumGCWR-kg(lbs.)Maximumtrailerweight-kg(lbs.)4.6L 3.55 5307 (11700) 2721 (6000)4.6L 3.73 5534 (1

Crew Cab 4x4 (139” wheelbase)Engine Rear axleratioMaximumGCWR-kg(lbs.)Maximumtrailerweight-kg(lbs.)4.6L 3.55 5307 (11700) 2721 (6000)4.6L 3.73 5534 (1

Note: Adjusting an equalizing hitch so the rear bumper of the vehicle ishigher than it was unloaded will defeat the function of the loadequalizing hit

Driving while you towWhen towing a trailer:• Turn off the speed control. The speed control may shut offautomatically when you are towing on long, stee

When backing down a ramp during boat launching or retrieval:• do not allow the static water level to rise above the bottom edge ofthe rear bumper.• do

SNOWPLOWINGFord recommends that the F–150 used for snow removal include theSnow Plow Prep Package Option. The option is available for F–150 4x4Regular

• The tire air pressures recommended for general driving are found onthe vehicle’s Safety Certification Label. The maximum cold inflationpressure for

Balance: Press to adjust the audio between the left and right speakers.Use/ / SEEK, SEEK .Fade: Press to adjust the audio between the front and rear s

Transmission operation while plowing• Shift transfer case to 4L (4WD Low) when plowing in small areas atspeeds below 8 km/h (5 mph).• Shift transfer c

GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program

U.S. Ford or Mercury vehicle customers who require roadside assistance,call 1–800–241–3673; Lincoln vehicle customers call 1–800–521–4140.Canadian cus

FUEL PUMP SHUT-OFF SWITCHThis device stops the electric fuel pump from sending fuel to the enginewhen your vehicle has had a substantial jolt.After an

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey ———3A Violet Vio

The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 10A* Run/Accessory - Wipers,Instrument clu

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description10 20A* Trailer tow back-up lamps relay(PCB1), Trailer tow parklamprelay (R

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description27 5A* Passenger Air bag Deactivation(PAD) warning lamp, Cluster airbag war

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description107 30A** Power door locks (BSM)108 30A** Passenger power seat109 30A** Dri

Auxiliary relay boxThe relay box is located in the engine compartment on the left fender.• Without Daytime Running Lamp (DRL) option2004 F150 (f12)Own

Locks and Security 83Keys 83Locks 83Anti-theft system 86Seating and Safety Restraints 98Seating 98Safety restraints 103Air bags 120Child restraints 13

FORD SINGLE CD SOUND SYSTEM (IF EQUIPPED)1./ Tune: Press to manuallygo up or down the radio frequency.Also use in menu mode to selectvarious settings.

• With Daytime Running Lamp (DRL) optionThe relays are coded as follows:Fuse/RelaylocationFuse ampratingDescriptionF01 5A Clockspring illuminationR01

The use of tire sealants may damage your tires.Spare tire informationYour vehicle is equipped with a spare tire that may be used as a spare ora regula

2. Fully insert the jack handlethrough the bumper hole and intothe guide tube through the accesshole in the rear bumper.3. Turn the handle countercloc

3. Block the diagonally oppositewheel.4. Obtain the spare tire and jackfrom their storage locations.5. Use the tip of the lug wrench toremove any whee

• RearTo lessen the risk ofpersonal injury, do not putany part of your body under thevehicle while changing a tire. Donot start the engine when yourve

• Seven lug nut wheel12. Stow the flat tire. Refer to Stowing the flat/spare tire.13. Stow the jack and lug wrench. Make sure the jack is fastened so

6. If removed, install the spare tire lock (if equipped) into the bumperdrive tube with the spare tire lock key (if equipped) and jack handle.Wheel lu

1. Use only a 12–volt supply to start your vehicle.2. Do not disconnect the battery of the disabled vehicle as this coulddamage the vehicle’s electric

2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat

Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.

Fade: Press to adjust the audio between the front and rear speakers.Use/ / SEEK, SEEK .Speed sensitive volume: Radio volume automatically changes slig

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized Ford dealer forwarranty repairs. While any Ford dealership handli

Ford Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf you own a Lincoln vehicle and are away f

In the United States, a warranty dispute must be submitted to theDispute Settlement Board before taking action under the Magnuson-MossWarranty Act, or

The Dispute Settlement Board may not be available in all states. FordMotor Company reserves the right to change eligibility limitations, modifyprocedu

from Ford and Lincoln Mercury dealership management, recognized fortheir business leadership qualities.What the Board needsTo have your case reviewed

Making a decisionBoard members review all available information related to eachcomplaint, including oral presentations, and arrive at a fair and impar

In the CAMVAP program, impartial third-party arbitrators conducthearings at mutually convenient times and places in an informalenvironment. These impa

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD track.12. Memory presets: To set astation: Selec

3. The vehicle is out of service for repair of nonconformities for a total ofmore than 30 calendar days (not necessarily all at one time)In the case o

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

PAINT CHIPSYour dealer has touch-up paint and sprays to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jam

• 4.6L engine• 5.4L engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage.PLASTIC (NON-PAIN

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

INTERIORFor fabric, carpets, cloth seats and safety belts:• Remove dust and loose dirt with a vacuum cleaner.• Remove light stains and soil with Motor

FORD, LINCOLN AND MERCURY CAR CARE PRODUCTSYour Ford, Lincoln or Mercury dealer has many quality products availableto clean your vehicle and protect i

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide a

• Manual transmission:1. Set the parking brake, depress the clutch and place the gearshift in N(Neutral).2. Block the wheels.Note: Do not start your e

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT4.6L V81. Battery2. Transmission fluid dipstick (automatic transmission)3. Engine oil filler cap4. Pow

FORD DUAL MEDIA SOUND SYSTEM (IF EQUIPPED)1./ Tune: Press to manuallygo up or down the radio frequency.Also use in menu mode to selectvarious settings

5.4L V81. Battery2. Transmission fluid dipstick (automatic transmission)3. Air filter assembly4. Power steering fluid reservoir5. Engine oil dipstick6

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

• 4.6L/5.4L engine5. Locate and carefully remove the engine oil level indicator (dipstick).6. Wipe the indicator clean. Insert the indicator fully, th

2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler cap

It is recommended you use the appropriate Motorcraft oil filter (oranother brand meeting Ford specifications) for your engine application.BATTERYYour

Keep batteries out of reach of children. Batteries contain sulfuricacid. Avoid contact with skin, eyes or clothing. Shield your eyeswhen working near

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “cold fill level” or within the “c

Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur

To reduce the risk of personal injury, make sure the engine iscool before unscrewing the coolant pressure relief cap. Thecooling system is under press

Balance: Press to adjust the audio between the left and right speakers.Use/ / SEEK, SEEK .Fade: Press to adjust the audio between the front and rear s

Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Refill capacities in this chapter.Fill your engine c

How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperaturegauge will move to the red (hot)area.• The mini message ce

Never remove the coolant reservoir cap while the engine isrunning or hot.5. Restart the engine and take your vehicle to a service facility.Driving the

• Extinguish all smoking materialsand any open flames beforefueling your vehicle.• Always turn off the vehicle beforefueling.• Automotive fuels can be

Use the following guidelines to avoid static build-up when filling anungrounded fuel container:• Place approved fuel container on the ground.• DO NOT

If you do not use the proper fuel filler cap, excessive pressure orvacuum in the fuel tank may damage the fuel system or causethe fuel cap to disengag

Many of the world’s automakers approved the World-wide Fuel Charterthat recommends gasoline specifications to provide improvedperformance and emission

Filling the tankThe advertised fuel capacity of the fuel tank on your vehicle is equal tothe rated refill capacity of the fuel tank as listed in the R

Calculation 1: Multiply liters used by 100, then divide by totalkilometers traveled.Calculation 2: Divide total miles traveled by total gallons used.K

• Operating a vehicle with the wheels out of alignment will reduce fueleconomy.• Use recommended engine oil. Refer to Lubricant specifications inthis

10. Repeat: Press to repeat thecurrent CD track.11. Fast forward: Press tomanually advance in a tape or CDtrack.12. Rewind: Press to manuallyreverse i

EMISSION CONTROL SYSTEMYour vehicle is equipped with various emission control components and acatalytic converter which will enable your vehicle to co

Please consult your Warranty Guide for complete emission warrantyinformation.On board diagnostics (OBD-II)Your vehicle is equipped with a computer tha

Allow the vehicle to sit for at least eight hours without starting theengine. Then, start the engine and complete the above driving cycle. Theengine m

BRAKE FLUID RESERVOIRThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the

Low fluid levelDo not drive the vehicle if the fluidlevel is at the bottom of the dipstickand the ambient temperature isabove 10°C (50°F).Correct flui

If an overfill occurs, excess fluidshould be removed by a qualifiedtechnician.An overfill condition oftransmission fluid may cause shift and/or engage

3. Add only enough fluid throughthe filler opening so that the fluidlevel is at the bottom of theopening.Use only fluid that meets Ford specifications

2. Carefully separate the two halvesof the air filter housing.3. Remove the air filter elementfrom the open end of the air filterhousing.4. Install a

3. Install a new air filter elementinto the tray assembly.4. Return air filter tray to originalposition by pressing firmly on thehandle until all rear

Traction AA A B CThe traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the tire’s ability to stop on wet pavement as me

21. Seek: Press to access theprevious strong station or track.22. Scan: Press for a brief samplingof radio stations or CD tracks. Pressagain to stop.F

• Standard load: A class of P-metric or Metric tires designed to carry amaximum load at 35 psi [37 psi (2.5 bar) for Metric tires]. Increasingthe infl

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - km/h (mph)Q 159 km/h (99 mp

• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested under controlled conditions on aspecified gover

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation than those of “P” typetires; t

Information on “T” type tiresT145/80D16 is an example of a tiresize.Note: The temporary tire size foryour vehicle may be different thanthis example.1.

Use the recommended cold inflation pressure for optimum tireperformance and wear. Under-inflation or over-inflation may causeuneven treadwear patterns

6. Visually inspect the tires to make sure there are no nails or otherobjects embedded that could poke a hole in the tire and cause an airleak.7. Chec

• Front Wheel Drive (FWD)vehicles (front tires at top ofdiagram)• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive (4WD)vehicles (front tires at top of

Sometimes irregular tire wear can be corrected by rotating the tires.Note: If your tires show uneven wear ask a qualified technician at areputable rep

Treble: Press to adjust the treble setting. Use / / SEEK,SEEK.Bass: Press to adjust the bass setting. Use/ / SEEK,SEEK .Balance: Press to adjust the a

• Avoid fast starts, stops and turns• Avoid potholes and objects on the road• Do not run over curbs or hit the tire against a curb when parkingIf you

• Install chains securely, verifying that the chains do not touch anywiring, brake lines or fuel lines.• Drive cautiously. If you hear the chains rub

REFILL CAPACITIESFluid Ford PartNameApplication CapacityBrake fluidand clutchfluidMotorcraft HighPerformanceDOT 3 MotorVehicle BrakeFluidAll Fill to l

Fluid Ford PartNameApplication CapacityTransmissionfluid3MotorcraftMERCON威VATF4R70/75 E-W 13.2L (13.9quarts)4Front axle Motorcraft SAE75W-90 FuelEffic

Some transmission fluids may be labeled as dual usage, such asMERCON威 and MERCON威 V. These dual usage fluids are not to be usedin an automatic transmi

LUBRICANT SPECIFICATIONSItemFord part nameor equivalentFord partnumberFordspecificationFront axle(4X4)Motorcraft SAE75W-90 FuelEfficient HighPerforman

ItemFord part nameor equivalentFord partnumberFordspecificationTransmission/steering/parkingbrake linkagesand pivots,brake andclutch pedalshaft (ifequ

ENGINE DATAEngine 4.6L V8 engine 5.4L V8 engineCubic inches 281 330Required fuel 87 octane 87 octaneFiring order 1-3-7-2-6-5-4-8 1-3-7-2-6-5-4-8Spark

2004 F150 (f12)Owners Guide (post-2002-fmt)USA English (fus)Maintenance and Specifications278

Super CabVehicledimensionsStyleside 5.5’box mm (in)Styleside/Flareside6.5’ box mm (in)Styleside 8.0’box mm (in)(1) Overalllength5536 (218.0) 5841 (230

Show functions.To activate, press and hold MENU until TRAFFIC appears in the display.This indicates RDS is active. Press MENU consecutively to scroll

Super CrewVehicle dimensions Styleside 5.5’ box mm (in)(1) Overall length 5689 (224)(2) Overall width 2005 (78.9)(3) Overall height 4x2/4x4 1867 (73.5

2004 F150 (f12)Owners Guide (post-2002-fmt)USA English (fus)Maintenance and Specifications281

IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Certification label be affixedt

1. World manufacturer identifier2. Brake type and gross vehicleweight rating (GVWR)3. Vehicle line, series, body type4. Engine type5. Check digit6. Mo

Truck application:Code Transmission DescriptionManual transmissionM Manual 5–speed (AKK))C Manual 5–speed overdrive (Close ratio)W Manual 5–speed over

FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of genuine Ford accessories are available for yourvehicle through your local authorized Ford or Ford

Splash guardsStep barsTonneau coversTruck capsWheelsInterior styleCell phone holdersConsolesElectrochromatic compass/temperature interior mirrorsFloor

Peace of mindAirbag anti-theft locksFirst aid and safety kitsFull vehicle coversLocking gas capNavigation systemsRemote startVehicle security systemsF

AAccessory delay ...59Air bag supplemental restraintsystem ...120–121and child safety seats ...

wheels ...222wiper blades ...224Climate control(see Air conditioningor Heating) ...

9. Repeat: Press to repeat thecurrent CD track.10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD t

Engine oil ...231checking and adding ...231dipstick ...231filter, specifica

Homelink wireless controlsystem ...66Hood ...228IIgnition ...

Parts (see Motorcraft parts) ...271Passenger OccupantClassification Sensor ...105Power distribution box (seeFuses) ...

tilting ...53TTailgate ...80Temperature control(see Climate control) ...

294

295

296

Cleaning 221Maintenance and Specifications 227Engine compartment 229Engine oil 231Battery 234Fuel information 242Air filter(s) 256Part numbers 271Refi

20. CD slot: Insert a CD label sideup.RADIO FREQUENCIESAM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Can

CD/CD PLAYER CAREDo:• Handle discs by their edges only. Never touch the playing surface.• Inspect discs before playing. Clean only with an approved CD

HEATER ONLY SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature selection:Controls the tempe

To increase airflow to the outer instrument panel vents, close the ventslocated in the middle of the instrument panel.Do not place objects on top of t

4. Recirculated air : Used to manually enable or disablerecirculated air operation. When activated, recirculates air in the cabinthereby reducing the

ELECTRONIC AUTOMATIC TEMPERATURE CONTROL (EATC)SYSTEM (IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius:If your vehicle is

MAX A/C: For maximum cooling performance, press , A/C, ,and set the temperature to 60°F and the highest blower setting.1.Defrost: Distributes outside

13. Auto: To engage automatic temperature control, press AUTO andselect the desired temperature using the temperature control. Thesystem will automati

Temperature conversion: To switch between Fahrenheit and Celsius:If your vehicle is equipped with a full message center, refer to Units(Fahrenheit/Cel

9. Driver heated seat control: Press to heat the driver seat. Pressonce to activate high heat (two indicator lights). Press again to activatelow heat

CALIFORNIA Proposition 65 WarningWARNING:Engine exhaust, some of its constituents, and certainvehicle components contain or emit chemicals known to th

To aid in side window defogging/demisting in cold weather:1. Select2. Select A/C3. Adjust the temperature control to maintain comfort.4. Set the fan s

HEADLAMP CONTROLRotate the headlamp controlclockwise to the first position toturn on the parking lamps. Rotateclockwise to the second position toalso

Foglamp control (if equipped)The headlamp control also operatesthe foglamps. The foglamps can beturned on only when the headlampcontrol is in the, orp

Flash to passPull toward you slightly to activateand release to deactivate.PANEL DIMMER CONTROLUse to adjust the brightness of theinstrument panel and

• (4) Horizontal reference line2. Measure the height from thecenter of your headlamp (indicatedby a 3.0 mm circle on the lens) tothe ground and mark a

TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.INTERIOR LAMPSMap lampsTo turn on the map la

Rear map lamp (if equipped)The rear map lamp lights arelocated on the end of the overheadrail system. The lamps can beturned on or off by pushing on t

BULBSReplacing exterior bulbsCheck the operation of all the bulbs frequently.Using the right bulbsReplacement bulbs are specified in the chart below.

2. At the top and inboard side of theheadlamp, loosen the three retainingscrews.3. Once the three retaining screwshave been removed, disengage thetab

Replacing front parking lamp/turn signal/sidemarker bulbs1. Make sure the headlamp controlis in the OFF position and open thehood.2. At the top and in

Warning symbols on your vehicleWhen you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempti

3. Carefully pull the lamp assemblystraight rearward from the tailgatepillar to disengage two hiddensnap-in retainers. (Flare side taillamps are not e

Replacing foglamp bulbs (if equipped)1. Make sure the headlamp controlis in the OFF position.2. Remove the bulb socket from thefoglamp by turningcount

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

TILT STEERING WHEEL (IF EQUIPPED)Pull the lever down to unlock thesteering column. While the lever isin the down position, tilt thesteering column to

1. To open the bins, move thecenter latch forward which willallow the door to be opened.2. The latches on the side of thebins are to enable the user t

Place both palms on the underside of the storage bin, avoiding thestorage bin door.Push upwards with palms.While pushing upwards with palms, grip the

With pressure applied with palms and side latches squeezed down, pulldownward on the entire storage bin and remove.AUXILIARY POWER POINTPower outlets

CENTER CONSOLE (IF EQUIPPED)The center console offers several useful storage features. These include:1. Cupholders2. Tissue holder in lid3. Power poin

POWER WINDOWS (IF EQUIPPED)When closing the powerwindows, you should verifythey are free of obstructions andensure that children and/or petsare not in

• Press and hold the bottom part ofthe rocker switch to open windowall the way to the full openposition.• Press and hold the top part of therocker swi

Service Data RecordingService data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This pote

To adjust your mirrors:1. Rotate the control clockwise toadjust the right mirror and rotatethe control counterclockwise toadjust the left mirror.2. Mo

Fold-away mirrorsFold the side mirrors in carefullybefore driving through a narrowspace, like an automatic car wash.POWER ADJUSTABLE FOOT PEDALS (IF E

Setting speed controlThe controls for using your speedcontrol are located on the steeringwheel for your convenience.1. Press the ON control and releas

Increasing speed while using speed controlThere are two ways to set a higherspeed:• Press and hold the SET controluntil you get to the desiredspeed, t

• Press the speed control OFFcontrol. This will erase yourvehicle’s previously set speed.Note: When you turn off the speedcontrol or the ignition, you

Climate control featuresPress TEMP + or - to adjusttemperature.Press FAN + or - to adjust fanspeed.MOON ROOF (IF EQUIPPED)The moon roof control is loc

To vent the moon roof: Press and hold the control. The moonroof must be in the closed position in order to move it into thevent position. To close, pr

also recommended that a new battery be placed in the hand-heldtransmitter of the device being programmed to HomeLink威 for quickertraining and accurate

7. Press and release the “learn” or “smart” button. (The name and colorof the button may vary by manufacturer.)Note: There are 30 seconds in which to

Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet

Front seat mounted rear-facing child or infant seats shouldNEVER be placed in front of an active passenger air bag.Using your vehicle with a snowplowF

MESSAGE CENTER (IF EQUIPPED)With the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle info

Usually, when something affects the compass readings, the compass willcorrect itself after a few days of operating your vehicle in normalconditions. I

Perform compass calibration in an open area free from steel structuresand high voltage lines. For optimum calibration, turn off all electricalaccessor

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in liters/100 km ormiles/gallon.If you calculate

Setup menuPress this control for the followingdisplays:• System Check• Units (English/Metric)• Autolock• Autolamp Delay• LanguageSystem checkSelecting

1. To disable/enable the autolockfeature, select this function from theSETUP control for the currentdisplay mode.2. Press the RESET control to turnthe

In the event of a multiple warning situation, the message center willcycle the display to show all warnings by displaying each one for 4seconds.The me

STOP ENGINE SAFELY. Displayed when the engine is overheating.Stop the vehicle as soon as safely possible, turn off the engine. If thewarning stays on

• Engine sensorContact your dealer as soon as possible if these messages occur on aregular basis.MINI MESSAGE CENTER ELECTRONIC COMPASS/TEMPERATUREDIS

1. Determine which magnetic zoneyou are in for your geographiclocation by referring to the zonemap.2. Turn ignition to the ON position.3. Start the en

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-

TAILGATE LOCK (IF EQUIPPED)Your vehicle may be equipped with atailgate lock designed to preventtheft of the tailgate.• Insert ignition key and turn to

BED EXTENDER (IF EQUIPPED)Your vehicle may be equipped with a bed extender designed to extendthe pickup box for longer loads.To extend the bed extende

To remove the bed extender:1. Extend the bed extender.2. Pull the round knobs on each sideof the extender to unlock it.Make sure the locking clip scre

KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w

Childproof door locks (if equipped)• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the ou

Keep vehicle doors and tonneau cover locked and keep keys andremote transmitters out of a child’s reach. Unsupervised childrencould lock themselves in

• unlock the vehicle doors withouta key.• lock all the vehicle doors withouta key.• activate the personal alarm.If there is any potential remote keyle

• the ignition is turned to the ON position, or• using the UNLOCKcontrol on your remote entry transmitter orunlocking via the keyless entry keypad.Dea

Activating the memory featureTo activate this feature:1. Position the seat and adjustable pedals to the positions you desire.2. Press the SET control

2. Do not wipe off any grease on thebattery terminals on the backsurface of the circuit board.3. Remove the old battery.4. Insert the new battery. Ref

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

To program the transmitters yourself:• Unlock all doors using the powerdoor lock/unlock control. Insert akey in the ignition and turn from1 (LOCK) to

Perimeter lighting featureThe perimeter lighting feature illuminates the exterior of the vehicle inorder to provide better visibility to the user whil

Autolock (if equipped)The autolock feature will lock all the doors when:• all the doors are closed,• the ignition is in the ON position,• you shift in

Keyless entry key pad procedure1. Turn the ignition to the OFF position.2. Close all the doors.3. Enter 5–digit entry code4. Press and hold the 7 • 8.

Tips:• Do not set a code that uses five of the same number.• Do not use five numbers in sequential order.• The factory set code will work even if you

SECURILOCK姟 PASSIVE ANTI-THEFT SYSTEMSecuriLock娂 passive anti-theft system is an engine immobilizationsystem. This system is designed to prevent the e

Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the 1(OFF) position.Automatic disarmingSwitching the ignition to the 3

1. Insert the first previouslyprogrammed coded key into theignition and turn the ignition from 1(OFF) to 3 (ON) (maintain ignitionin 3 (ON) for at lea

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Front seat• Lift the track release bar to movethe seat forward or rearward.Make sure that the seat isrelatched into place.• Pull the release lever han