Ford 2004 F-150 v.4 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Voitures Ford 2004 F-150 v.4. FORD 2004 F-150 v.4 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 252
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Introduction 4
Instrument Cluster 10
Warning and control lights 10
Gauges 15
Entertainment Systems 18
AM/FM stereo 18
AM/FM stereo with CD 20
AM/FM stereo cassette with CD 23
AM/FM stereo with in-dash six CD 26
Climate Controls 32
Heater only 32
Manual heating and air conditioning 33
Electronic automatic temperature control 35
Rear window defroster 40
Lights 41
Headlamps 41
Turn signal control 45
Bulb replacement 46
Driver Controls 52
Windshield wiper/washer control 52
Steering wheel adjustment 53
Power windows 58
Mirrors 59
Speed control 61
Message center 70
Tailgate 80
Table of Contents
1
Vue de la page 0
1 2 3 4 5 6 ... 251 252

Résumé du contenu

Page 1

Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 15Entertainment Systems 18AM/FM stereo 18AM/FM stereo with CD 20AM/FM stereo ca

Page 2

WARNING LIGHTS AND CHIMESBase instrument clusterBase with Tachometer instrument clusterMid instrument cluster2004 F150 (f12)Owners Guide (post-2002-fm

Page 3

Press the control to move the seatforward, backward, up or down.Memory seats/adjustable pedals (if equipped)This system allows automaticpositioning of

Page 4

REAR SEATSHead restraintsThe purpose of these head restraints is to help limit head motion in theevent of a rear collision. To properly adjust your he

Page 5

1. Pull control to release seatcushion.2. Rotate seat cushion up until itlocks into vertical storage position.Returning the seat to seating positionAl

Page 6

• Restraints Control Module (RCM) with impact and safing sensors.• Restraint system warning light and back-up tone.• The electrical wiring for the air

Page 7

position. The system is designed to help protect smaller drivers sittingclose to the driver air bag by providing a lower air bag output level.Front pa

Page 8

allows your Personal Safety System to tailor the air bag deployment andsafety belt pretensioner activation depending upon safety belt usage.Refer to S

Page 9

If any of these things happen, even intermittently, have the PersonalSafety System serviced at your dealership or by a qualified technicianimmediately

Page 10

Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.Safety belts and seats can becom

Page 11

• Front seats• Rear seats (if equipped)Energy management retractorsYour vehicle has a seat belt system equipped with energy managementretractors at th

Page 12

The front seat belt system can also be made to lock manually by quicklypulling on the shoulder belt. Rear seat belts (if equipped) cannot bemade to lo

Page 13

Luxury instrument clusterWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa

Page 14

2. Grasp the shoulder portion andpull downward until the entire beltis extracted.3. Allow the belt to retract. As the belt retracts, you will hear a c

Page 15

The driver and front outboard passenger safety belt pretensioners aredesigned to activate only during certain frontal or near-frontal collisionswith s

Page 16

Front safety belt height adjustment (if equipped)Your vehicle has safety belt heightadjustments for the driver and rightfront passenger. Adjust the he

Page 17

Insert the tongue into the correctbuckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen the belt, turn thetongue at a righ

Page 18

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

Page 19

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h

Page 20

Reasons given... Consider...“Crashes are rare events” 36700 crashes occur every day. Themore we drive, the more we areexposed to “rare” events, even f

Page 21

Reasons given... Consider...“I have an air bag” Air bags offer greater protection whenused with safety belts. Frontal airbagsare not designed to infla

Page 22

To reduce the risk of injury, do not deactivate/activate the BeltMinder feature while driving the vehicle.1. Turn the ignition switch to the RUN (or O

Page 23

there are no nicks, tears or cuts. Replace if necessary. All safety beltassemblies, including retractors, buckles, front seat belt buckleassemblies, b

Page 24

On vehicles equipped with a message center, “ENGINE FAILSAFEMODE” will be displayed, refer to Message Center in the DriverControls chapter.Brake syste

Page 25

• one or more impact and safing sensors.• the same indicator light, RCM (restraints control module) anddiagnostic unit used for the Personal safety sy

Page 26

The National Highway Traffic Safety Administration (NHTSA)recommends a minimum distance of at least 25 cm (10 inches)between an occupant’s chest and t

Page 27

Additional equipment may affect the performance of the air bagsensors increasing the risk of injury. Please refer to the BodyBuilders Layout Book for

Page 28

How does the air bag supplemental restraint system work?The air bag SRS is designed toactivate when the vehicle sustainssufficient longitudinal decele

Page 29

If the air bag has deployed, the air bag will not functionagain and must be replaced immediately. If the air bag is notreplaced, the unrepaired area w

Page 30

• The front passenger seat is unoccupied.• The system determines that a small child is present in a rear-facingchild seat that is properly installed a

Page 31

The front passenger sensing system is designed to turn off the frontpassenger’s frontal air bag when a rear facing child seat, a forward-facingchild r

Page 32

Vehicles without rear seats areequipped with an Airbag On/Offswitch, which will override thedecision from the passenger sensingsystem when turned to O

Page 33

If it is necessary to modify an advanced front air bag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center a

Page 34

2. When the ignition is turned to theON position the “passenger airbagoff” indicator light illuminatesbriefly, momentarily shuts off andthen turns bac

Page 35

Charging system: Illuminates whenthe battery is not charging properly.Door ajar: Illuminates when theignition is in the ON position andany door is ope

Page 36

The safety belts for the driver and right front passenger seatingpositions have been specifically designed to function togetherwith the air bags in ce

Page 37

• the infant has a medical condition which, according to the infant’sphysician, makes it necessary for the infant to ride in the front so thatthe driv

Page 38

3. Medical condition: A passenger has a medical condition that,according to his or her physician:• poses a special risk for the passenger if the air b

Page 39

Do not leave children, unreliable adults, or pets unattended inyour vehicle.Child booster seatsChildren outgrow a typical convertible or toddler seat

Page 40

Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi

Page 41

Follow all instructions provided by the manufacturer of thebooster seat.Never put the shoulder belt under a child’s arm or behind theback because it e

Page 42

• Place seat back in upright position.• Put the safety belt in the automatic locking mode. Refer to Automaticlocking mode (passenger side front seatin

Page 43

1. Position the child safety seat in aseat with a combination lap andshoulder belt.2. Pull down on the shoulder beltand then grasp the shoulder beltan

Page 44

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear

Page 45

8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly move the seat forwardand back to m

Page 46

MINI MESSAGE CENTER WARNING DISPLAYS (IF EQUIPPED)Door ajar: Displays when theignition is in the ON position andany door is open.Low fuel: Displays wh

Page 47

7. Before placing the child into the child seat, forcibly tilt the child seatfrom side to side and in forward direction to make sure that the seat ish

Page 48

• F150 SuperCrew and SuperCabFront seat tether strap attachment1. Position the child safety seat on the seat cushion.2. Route the child safety seat te

Page 49

• Front seat Regular Cab center(located on back panel)If the tether strap is clippedincorrectly, the child safetyseat may not be retained properlyin t

Page 50

Rear seat tether strap attachmentThere are three loops of webbingjust above the back of the rear seat(along the bottom edge of the rearwindow) in the

Page 51

3. Install the child safety seat tightlyusing the LATCH anchors or safetybelts. Follow the instructions in thischapter.4. Tighten the tether strapacco

Page 52

Connectors on the LATCH child seatand the child seat instructions mayuse the symbol shown here. Yourvehicle seat may have plain buttons,instead of thi

Page 53

Installing LATCH seats (Regular Cab)When you install a child seat on the front passenger seat of aRegular Cab, turn the Passenger Airbag On/Off switch

Page 54

STARTINGPositions of the ignition1. OFF/LOCK, locks the steeringwheel, automatic transmissiongearshift lever and allows keyremoval.Note: The ignition

Page 55

Do not start your vehicle in a closed garage or in other enclosedareas. Exhaust fumes can be toxic. Always open the garage doorbefore you start the en

Page 56

4. Make sure the parking brake isset.5. Turn the key to 3 (ON) withoutturning the key to 4 (START).BRAKE43212004 F150 (f12)Owners Guide (post-2002-fmt

Page 57

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

Page 58

Make sure the corresponding lights illuminate or illuminate briefly. If alight fails to illuminate, have the vehicle serviced.• If the driver’s safety

Page 59

Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START). Ifthere is difficulty in turning the key,rotate the steering wheel u

Page 60

BRAKESOccasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, the brake linings may be worn-o

Page 61

Parking brakeTo set the parking brake (1), pressthe parking brake pedal down untilthe pedal stops.To release, pull the lever (2).Always set the parkin

Page 62

TRACTION-LOK AXLE (IF EQUIPPED)This axle provides added traction on slippery surfaces, particularly whenone wheel is on a poor traction surface. Under

Page 63

has blown or the vehicle’s brakelamps are not operating properly. Referto Fuses and relays in the Roadside Emergencies chapter.If the fuse is not blow

Page 64

If you cannot move the gearshift lever out of P (Park) with ignition inthe ON position and the brake pedal depressed, it is possible that a fusehas bl

Page 65

Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position andremove the key wheneve

Page 66

To put your vehicle in gear:• Start the engine• Depress the brake pedal• Move the gearshift lever into the desired gear• Release the parking brake.To

Page 67

• Column-shift transmission• Floor-shift transmissionThe transmission control indicator(TCIL) will illuminate on theinstrument cluster.Drive (not show

Page 68

• With Full Message CenterRefer to Message Center in theDrivers Controls chapter on how toswitch the display from Metric toEnglish.Trip odometer: Regi

Page 69

• To return to D (Overdrive), move the gearshift lever into the D(Overdrive) position.• Selecting 2 (Second) at higher speeds will cause the transmiss

Page 70

To help avoid personal injury, always use caution when inreverse and when using the RSS.This system is not designed to prevent contact with small ormo

Page 71

The RSS automatically turns onwhen the gearshift lever is placed inR (Reverse) and the ignition is ON.An RSS control allows the driver toturn the RSS

Page 72

Using a manual 4WD system (if equipped)2H (2WD High) – Power to the rear wheels only; used for street andhighway driving. Provides optimal smoothness

Page 73

4. Move the transfer case lever through N (Neutral) directly to thedesired position.• If the transfer case will not engage into 4L (4WD Low), drive th

Page 74

will not engage while the vehicle is moving; this is normal and should beno reason for concern. Refer to Shifting to/from 4L (4WD Low) forproper opera

Page 75

Drive cautiously to avoid vehicle damage from concealed objects such asrocks and stumps.You should either know the terrain or examine maps of the area

Page 76

If your vehicle gets stuckIf your vehicle gets stuck in mud or snow it may be rocked out byshifting between forward and reverse gears, stopping betwee

Page 77

ParkingOn some 4WD vehicles, when the transfer case is in the N (Neutral)position, the engine and transmission are disconnected from the rest ofthe dr

Page 78

SandWhen driving over sand, try to keep all four wheels on the most solidarea of the trail. Avoid reducing the tire pressures but shift to a lowergear

Page 79

off the engine and check the engine oil level. Add oil if needed. If the oillevel is correct, have your vehicle checked at your dealership or by aqual

Page 80

“Tread Lightly” is an educationalprogram designed to increase publicawareness of land-use regulationsand responsibilities in our nationswilderness are

Page 81

Descend a hill in the same gear youwould use to climb up the hill toavoid excessive brake applicationand brake overheating. Do notdescend in neutral;

Page 82

Tires, Replacement RequirementsDo not use a size and type of tire and wheel other than thatoriginally provided by Ford Motor Company because it can af

Page 83

Each day before you drive, checkyour tires. If one looks lower thanthe others, use a tire gauge to checkpressure of all tires, and adjust ifrequired.

Page 84

the wheel rims (for cars). Traction or brake capability may be limitedand your vehicle may stall. Water may also enter your engine’s air intakeand sev

Page 85

Exceeding the Safety Certification Label axle weight rating limitscould result in substandard vehicle handling, performance,engine, transmission and/o

Page 86

GCW (Gross Combined Weight) – is the weight of the loaded vehicle(GVW) plus the weight of the fully loaded trailer.GCWR (Gross Combined Weight Rating)

Page 87

Exceeding any vehicle weight rating limitation could result inserious damage to the vehicle and/or personal injury.Special loading instructions for ow

Page 88

Do not exceed the GVWR or the GAWR specified on thecertification label.Towing trailers beyond the maximum recommended gross trailerweight exceeds the

Page 89

Regular Cab 4x4 (126” wheelbase)Engine Rear axleratioMaximumGCWR-lbs.(kg)Maximumtrailerweight-lbs.(kg)4.6L 3.55 11500 (5216) 6200 (2812)4.6L 3.73 1200

Page 90

FORD AM/FM STEREO SYSTEM (IF EQUIPPED)1./ Tune: Press to manuallygo up or down the radio frequency.Also use in menu mode to selectvarious settings.2.

Page 91

SuperCab 4x2 (133” wheelbase)Engine Rear axleratioMaximumGCWR-lbs.(kg)Maximumtrailerweight-lbs.(kg)4.6L 3.55 11500 (5216) 6300 (2858)4.6L 3.73 12000 (

Page 92

SuperCab 4x4 (133” wheelbase)Engine Rear axleratioMaximumGCWR-lbs.(kg)Maximumtrailerweight-lbs.(kg)4.6L 3.55 11500 (5216) 5900 (2676)4.6L 3.73 12000 (

Page 93

Crew Cab 4x2 (139” wheelbase)Engine Rear axleratioMaximumGCWR-lbs.(kg)Maximumtrailerweight-lbs.(kg)4.6L 3.55 11700 (5307) 6200 (2812)4.6L 3.73 12200 (

Page 94

HitchesDo not use hitches that clamp onto the vehicle’s bumper or attach to theaxle. You must distribute the load in your trailer so that 10%–15% of t

Page 95

The braking system of the tow vehicle is rated for operation at theGVWR not GCWR.Trailer lampsTrailer lamps are required on most towed vehicles. Make

Page 96

• The trailer tongue weight should be 10–15% of the loaded trailerweight.• After you have traveled 50 miles (80 km), thoroughly check yourhitch, elect

Page 97

Ford recommends the driveshaft be removed/installed only by a qualifiedtechnician. See your local dealer for driveshaft removal/installation.Improper

Page 98

• Front wheel toe may require re-adjustment to prevent prematureuneven tire wear. Specifications are found in the Ford WorkshopManual.• Headlight aim

Page 99

Do not attempt to service, repair, or modify the air bagsupplemental restraint system (SRS) or its fuses. See your Fordor Lincoln Mercury dealer.Trans

Page 100

GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program

Page 101

Setting the clock: Press until HR or Mn is displayed.Press/ / SEEK to adjust the hours/minutes.3. Seek: Press to access thenext/previous strong statio

Page 102

Canadian customers who require roadside assistance, call1–800–665–2006.If you need to arrange roadside assistance for yourself, Ford MotorCompany will

Page 103

FUEL PUMP SHUT-OFF SWITCHThis device stops the electric fuel pump from sending fuel to the enginewhen your vehicle has had a substantial jolt.After an

Page 104

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey ———3A Violet Vio

Page 105

The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 10A* Run/Accessory - Wipers,Instrument clu

Page 106

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description10 20A* Trailer tow back-up lamps relay(PCB1), Trailer tow parklamprelay (R

Page 107

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description27 5A* Passenger Air bag Deactivation(PAD) warning lamp, Cluster airbag war

Page 108

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description107 30A** Power door locks (BSM)108 30A** Passenger power seat109 30A** Dri

Page 109

Auxiliary relay boxThe relay box is located in the engine compartment on the left fender.• Without Daytime Running Lamp (DRL) option2004 F150 (f12)Own

Page 110

• With Daytime Running Lamp (DRL) optionThe relays are coded as follows:Fuse/RelaylocationFuse ampratingDescriptionF01 5A Clockspring illuminationR01

Page 111

CHANGING THE TIRESIf you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel

Page 112

Locks and Security 83Keys 83Locks 83Anti-theft system 85Seating and Safety Restraints 97Seating 97Safety restraints 102Air bags 119Child restraints 13

Page 113

FORD SINGLE CD SOUND SYSTEM (IF EQUIPPED)1./ Tune: Press to manuallygo up or down the radio frequency.Also use in menu mode to selectvarious settings.

Page 114

When driving with the dissimilar spare tire/wheel additional cautionshould be given to:• Towing a trailer• Driving vehicles equipped with a camper bod

Page 115

Removing the spare tire1. Use the ignition key to removethe lock cylinder from the accesshole of the bumper to allow accessto the guide tube. Assemble

Page 116

1. Park on a level surface, activatehazard flashers and set the parkingbrake.2. Place gearshift lever in P (Park)and turn engine OFF.3. Block the diag

Page 117

• FrontNote: Use the frame rail as the jacking location point, NOT the controlarm.• RearTo lessen the risk ofpersonal injury, do not putany part of yo

Page 118

11. Remove the jack and fullytighten the lug nuts in the ordershown (Refer to Wheel lug nuttorque specifications later in thischapter for the proper l

Page 119

ratchets or slips with little effort, take the vehicle to your dealer forassistance at your earliest convenience.4. Check that the tire lies flat agai

Page 120

Do not attempt to push-start your vehicle. Automatictransmissions do not have push-start capability; doing so maydamage the catalytic converter.Prepar

Page 121

2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat

Page 122

4. Make the final connection of the negative (-) cable to an exposedmetal part of the stalled vehicle’s engine, away from the battery and thecarbureto

Page 123

Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa

Page 124

Fade: Press to adjust the audio between the front and rear speakers.Use/ / SEEK, SEEK .Speed sensitive volume: Radio volume automatically changes slig

Page 125

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

Page 126

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

Page 127

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized Ford dealer forwarranty repairs. While any Ford dealership handli

Page 128

Ford Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf you own a Lincoln vehicle and are away f

Page 129

In the United States, a warranty dispute must be submitted to theDispute Settlement Board before taking action under the Magnuson-MossWarranty Act, or

Page 130

procedures and/or to discontinue this service without notice and withoutincurring obligations per applicable state law.What kinds of cases does the Bo

Page 131

What the Board needsTo have your case reviewed you must complete the application in theDSB brochure and mail it to the address provided on the applica

Page 132

Every effort is made to decide the case within 40 days of the date thatall requested information is received by the Board. Since the Boardgenerally me

Page 133

parties, make decisions and, when appropriate, render awards to resolvedisputes. CAMVAP decisions are fast, fair, and final; the arbitrator’saward is

Page 134

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

Page 135

10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD track.12. Memory presets: To set astation: Selec

Page 136

3. The vehicle is out of service for repair of nonconformities for a total ofmore than 30 calendar days (not necessarily all at one time)In the case o

Page 137

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

Page 138

PAINT CHIPSYour dealer has touch-up paint and sprays to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jam

Page 139

• 4.6L engine• 5.4L engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage.PLASTIC (NON-PAIN

Page 140

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

Page 141

INTERIORFor fabric, carpets, cloth seats and safety belts:• Remove dust and loose dirt with a vacuum cleaner.• Remove light stains and soil with Motor

Page 142

FORD, LINCOLN AND MERCURY CAR CARE PRODUCTSYour Ford, Lincoln or Mercury dealer has many quality products availableto clean your vehicle and protect i

Page 143

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide a

Page 144

• Manual transmission:1. Set the parking brake, depress the clutch and place the gearshift in N(Neutral).2. Block the wheels.Note: Do not start your e

Page 145

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT4.6L V81. Battery2. Transmission fluid dipstick (automatic transmission)3. Engine oil filler cap4. Pow

Page 146

FORD DUAL MEDIA SOUND SYSTEM (IF EQUIPPED)1./ Tune: Press to manuallygo up or down the radio frequency.Also use in menu mode to selectvarious settings

Page 147

5.4L V81. Battery2. Transmission fluid dipstick (automatic transmission)3. Air filter assembly4. Power steering fluid reservoir5. Engine oil dipstick6

Page 148

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

Page 149

• 4.6L/5.4L engine5. Locate and carefully remove the engine oil level indicator (dipstick).6. Wipe the indicator clean. Insert the indicator fully, th

Page 150

2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler cap

Page 151

It is recommended you use the appropriate Motorcraft oil filter (oranother brand meeting Ford specifications) for your engine application.BATTERYYour

Page 152

Keep batteries out of reach of children. Batteries contain sulfuricacid. Avoid contact with skin, eyes or clothing. Shield your eyeswhen working near

Page 153

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin

Page 154

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

Page 155

Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur

Page 156

To reduce the risk of personal injury, make sure the engine iscool before unscrewing the coolant pressure relief cap. Thecooling system is under press

Page 157

Balance: Press to adjust the audio between the left and right speakers.Use/ / SEEK, SEEK .Fade: Press to adjust the audio between the front and rear s

Page 158

Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Refill capacities in this section.Fill your engine c

Page 159

How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperaturegauge will move to the red (hot)area.• The mini message ce

Page 160

Never remove the coolant reservoir cap while the engine isrunning or hot.5. Restart the engine and take your vehicle to a service facility.Driving the

Page 161

Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforefueling your vehicle.• Alwa

Page 162

Use the following guidelines to avoid static build-up when filling anungrounded fuel container:• Place approved fuel container on the ground.• DO NOT

Page 163

If you do not use the proper fuel filler cap, excessive pressure orvacuum in the fuel tank may damage the fuel system or causethe fuel cap to disengag

Page 164

It should not be necessary to add any aftermarket products to your fueltank if you continue to use high quality fuel of the recommended octanerating.

Page 165

possible. Fuel expense, frequency of fill-ups or fuel gauge readings areNOT accurate as a measure of fuel economy. We do not recommendtaking fuel econ

Page 166

3. After at least three to five tank fill-ups, fill the fuel tank and recordthe current odometer reading.4. Subtract your initial odometer reading fro

Page 167

• Resting your foot on the brake pedal while driving may reduce fueleconomy.• Combine errands and minimize stop-and-go driving.Maintenance• Keep tires

Page 168

10. Repeat: Press to repeat thecurrent CD track.11. Fast forward: Press tomanually advance in a tape or CDtrack.12. Rewind: Press to manuallyreverse i

Page 169

It is important to note the box in the lower left corner of the windowsticker. These numbers represent the Range of L/100 km (MPG)expected on the vehi

Page 170

permitted to intentionally remove an emission control device or preventit from working. Information about your vehicle’s emission system is onthe Vehi

Page 171

condition. To ready the on-board diagnostics system for I/M testing, aminimum of 30 minutes of city and highway driving is necessary asdescribed below

Page 173

21. Seek: Press to access theprevious strong station or track.22. Scan: Press for a brief samplingof radio stations or CD tracks. Pressagain to stop.F

Page 174

Treble: Press to adjust the treble setting. Use / / SEEK,SEEK.Bass: Press to adjust the bass setting. Use/ / SEEK,SEEK .Balance: Press to adjust the a

Page 175

Show functions.To activate, press and hold MENU until TRAFFIC appears in the display.This indicates RDS is active. Press MENU consecutively to scroll

Page 176

9. Repeat: Press to repeat thecurrent CD track.10. Fast forward: Press tomanually advance in a CD track.11. Rewind: Press to manuallyreverse in a CD t

Page 177

Maintenance and Specifications 227Engine compartment 229Engine oil 231Battery 234Fuel information 242Air filter(s) 257Tire Information 260Part numbers

Page 178

20. CD slot: Insert a CD label sideup.RADIO FREQUENCIESAM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Can

Page 179

• Inspect discs before playing. Clean only with an approved CD cleanerand wipe from the center out.Don’t:• Expose discs to direct sunlight or heat sou

Page 180

HEATER ONLY SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature selection:Controls the tempe

Page 181

To increase airflow to the outer instrument panel vents, close the ventslocated in the middle of the instrument panel.Do not place objects on top of t

Page 182

4. Recirculated air : Used to manually enable or disablerecirculated air operation. When activated, recirculates air in the cabinthereby reducing the

Page 183

ELECTRONIC AUTOMATIC TEMPERATURE CONTROL (EATC)SYSTEM (IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius:If your vehicle is

Page 184

MAX A/C: For maximum cooling performance, press , A/C, ,and set the temperature to 60°F and the highest blower setting.1.Defrost: Distributes outside

Page 185

13. Auto: To engage automatic temperature control, press AUTO andselect the desired temperature using the temperature control. Thesystem will automati

Page 186

(Fahrenheit/Celsius) in the Driver Controls chapter.If your vehicle is equipped with a mini message center, refer to Minimessage center electronic com

Page 187

11. Recirculation control: Press to activate/deactivate airrecirculation in the cabin. Recirculated air may reduce the amount oftime to cool down the

Page 188

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Page 189

Do not place objects on top of the instrument panel as theseobjects may become projectiles in a collision or sudden stop.REAR WINDOW DEFROSTER (IF EQU

Page 190

HEADLAMP CONTROLRotate the headlamp controlclockwise to the first position toturn on the parking lamps. Rotateclockwise to the second position toalso

Page 191

Foglamp control (if equipped)The headlamp control also operatesthe foglamps. The foglamps can beturned on only when the headlampcontrol is in the, orp

Page 192

Flash to passPull toward you slightly to activateand release to deactivate.PANEL DIMMER CONTROLUse to adjust the brightness of theinstrument panel and

Page 193

2. Measure the height from thecenter of your headlamp (indicatedby a 3.0 mm circle on the lens) tothe ground and mark a 2.4 meter(8 foot) horizontal r

Page 194

TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.INTERIOR LAMPSMap lampsTo turn on the map la

Page 195

Rear map lamp (if equipped)The rear map lamp lights arelocated on the end of the overheadrail system. The lamps can beturned on or off by pushing on t

Page 196

Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbsmust be marked with an authorized “D.O.T.” for North America an

Page 197

2. At the top and inboard side of theheadlamp, loosen the three retainingscrews.3. Once the three retaining screwshave been removed, disengage thetab

Page 198

Replacing front parking lamp/turn signal/sidemarker bulbs1. Make sure the headlamp controlis in the OFF position and open thehood.2. At the top and in

Page 199

Warning symbols on your vehicleWhen you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempti

Page 200

3. Carefully pull the lamp assemblystraight rearward from the tailgatepillar to disengage two hiddensnap-in retainers. (Flare side taillamps are not e

Page 201

Replacing license plate lamp bulbsThe license plate bulbs are locatedbehind the rear bumper. To changethe license plate lamp bulbs:1. Reach behind the

Page 202

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

Page 203

TILT STEERING WHEEL (IF EQUIPPED)Pull the lever down to unlock thesteering column. While the lever isin the down position, tilt thesteering column to

Page 204

1. To open the bins, move thecenter latch forward which willallow the door to be opened.2. The latches on the side of thebins are to enable the user t

Page 205

Place both palms on the underside of the storage bin, avoiding thestorage bin door.Push upwards with palms.While pushing upwards with palms, grip the

Page 206

With pressure applied with palms and side latches squeezed down, pulldownward on the entire storage bin and remove.AUXILIARY POWER POINTPower outlets

Page 207

An additional auxiliary power pointis located on the lower rear side ofthe center console. The power pointis accessible from the rear seats.CENTER CON

Page 208

A driver’s first responsibility is the safe operation of the vehicle.The most important thing you can do to prevent a crash is toavoid distractions an

Page 209

Power Sliding Back Window (if equipped)To operate the power sliding back window, the ignition switch must be inthe Run or Accessory position.• Press a

Page 210

Service Data RecordingService data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This pote

Page 211

Press the control to turn the mirrorOFF or AUTO.The mirror will automatically returnto the normal state whenever thevehicle is placed in R(Reverse)(wh

Page 212

Exterior mounted mirror turn signal indicator (if equipped)When the vehicle turn signal isactivated, the lower portion of themirror housing will blink

Page 213

Do not use the speed control in heavy traffic or on roads thatare winding, slippery or unpaved.Setting speed controlThe controls for using your speedc

Page 214

Increasing speed while using speed controlThere are two ways to set a higherspeed:• Press and hold the SET controluntil you get to the desiredspeed, t

Page 215

• Press the speed control OFFcontrol. This will erase yourvehicle’s previously set speed.Note: When you turn off the speedcontrol or the ignition, you

Page 216

Climate control featuresPress TEMP + or - to adjusttemperature.Press FAN + or - to adjust fanspeed.MOON ROOF (IF EQUIPPED)The moon roof control is loc

Page 217

To vent the moon roof: Press and hold the control. The moonroof must be in the closed position in order to move it into thevent position. To close, pr

Page 218

also recommended that a new battery be placed in the hand-heldtransmitter of the device being programmed to HomeLink威 for quickertraining and accurate

Page 219

7. Press and release the “learn” or “smart” button. (The name and colorof the button may vary by manufacturer.)Note: There are 30 seconds in which to

Page 220

Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet

Page 221

Front seat mounted rear-facing child or infant seats shouldNEVER be placed in front of an active passenger air bag.Using your vehicle with a snowplowF

Page 222

MESSAGE CENTER (IF EQUIPPED)With the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle info

Page 223

Usually, when something affects the compass readings, the compass willcorrect itself after a few days of operating your vehicle in normalconditions. I

Page 224

Perform compass calibration in an open area free from steel structuresand high voltage lines. For optimum calibration, turn off all electricalaccessor

Page 225

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in liters/100 km ormiles/gallon.If you calculate

Page 226

Setup menuPress this control for the followingdisplays:• System Check• Units (English/Metric)• Autolock• Autolamp Delay• LanguageSystem checkSelecting

Page 227

1. To disable/enable the autolockfeature, select this function from theSETUP control for the currentdisplay mode.2. Press the RESET control to turnthe

Page 228

In the event of a multiple warning situation, the message center willcycle the display to show all warnings by displaying each one for 4seconds.The me

Page 229

STOP ENGINE SAFELY. Displayed when the engine is overheating.Stop the vehicle as soon as safely possible, turn off the engine. If thewarning stays on

Page 230

• Engine sensorContact your dealer as soon as possible if these messages occur on aregular basis.MINI MESSAGE CENTER ELECTRONIC COMPASS/TEMPERATUREDIS

Page 231

Compass zone adjustment1. Determine which magnetic zoneyou are in for your geographiclocation by referring to the zonemap.2. Turn ignition to the ON p

Page 232

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-

Page 233

TAILGATE LOCK (IF EQUIPPED)Your vehicle may be equipped with atailgate lock designed to preventtheft of the tailgate.• Insert ignition key and turn to

Page 234

To extend the bed extender:1. Lower tailgate.2. Pull the round knobs on each sideof the extender to release it fromthe pickup box.3. Pivot extender on

Page 235

Note: Remove and store the bed extender when not in use.To install the bed extender, follow the removal procedure in reverseorder.2004 F150 (f12)Owner

Page 236

KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w

Page 237

Childproof door locks (if equipped)• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the ou

Page 238

• unlock the vehicle doors withouta key.• lock all the vehicle doors withouta key.• activate the personal alarm.If there is any potential remote keyle

Page 239

• the ignition is turned to the 3 (ON) position, or• using the UNLOCKcontrol on your remote entry transmitter orunlocking via the keyless entry keypad

Page 240

Activating the memory featureTo activate this feature:1. Position the seat and adjustable pedals to the positions you desire.2. Press the SET control

Page 241

2. Do not wipe off any grease on thebattery terminals on the backsurface of the circuit board.3. Remove the old battery. Note:Please refer to local re

Page 242

• Unlock all doors using the powerdoor lock/unlock control. Insert akey and turn the ignition fromthe 1 (OFF/LOCK) to the 3 (ON)position and cycle bet

Page 243

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

Page 244

Perimeter lighting feature (if equipped)The perimeter lighting feature illuminates the exterior of the vehicle inorder to provide better visibility to

Page 245

Autolock (if equipped)The autolock feature will lock all the doors when:• all the doors are closed,• the ignition is in the 3 (ON) position,• you shif

Page 246

Keyless entry key pad procedure1. Turn the ignition to the 1 (OFF/LOCK) position.2. Close all the doors.3. Enter 5–digit entry code4. Press and hold t

Page 247

Tips:• Do not set a code that uses five of the same number.• Do not use five numbers in sequential order.• The factory set code will work even if you

Page 248

SECURILOCK姟 PASSIVE ANTI-THEFT SYSTEMSecuriLock娂 passive anti-theft system is an engine immobilizationsystem. This system is designed to prevent the e

Page 249

Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the 1(OFF/LOCK) position.Automatic disarmingSwitching the ignition to

Page 250

1. Insert the first previouslyprogrammed coded key into theignition and turn the ignition fromthe 1 (OFF/LOCK) position to the 3(ON) position (maintai

Page 251

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Page 252

Front seat• Lift the track release bar to movethe seat forward or rearward.Make sure that the seat isrelatched into place.• Pull the release lever han

Page 253

Using the manual lumbar supportFor more lumbar support, turn thelumbar support control toward thefront of vehicle.For less lumbar support, turn thelum

Commentaires sur ces manuels

Pas de commentaire