Ford 2004 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 122)

Compass zone adjustment

1. Determine which magnetic zone

you are in for your geographic

location by referring to the zone

map.

2. Turn ignition to the ON position.

3. Start the engine.

4. Locate the reset button on the

compass sensor mounted on the

base of mirror.

5. Press and hold for six seconds

and release. You will see that ZONE

appears in the instrument cluster

display.

6. Press and release the button until the desired zone number appears.

Note: The range of zone values are from 01 to 15 and “wraps” back to

01.

7. When you get to the desired ZONE number, hold the button down to

“lock in” the new value.

The cluster display will return to the “normal” mode when the button

has not been pressed for 6 seconds.

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and

high voltage lines. For optimum calibration, turn off all electrical

accessories (heater/air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

1. Start the vehicle.

2. Locate the reset button on the

compass sensor mounted on the

base of mirror.

3. To enter the compass calibration

mode, press and hold the button for

greater than eight seconds. The display will then show CAL in the

display window.

123

6 7 8 9 1011

2004 Expedition (exd)

Owners Guide (post-2002-fmt)

USA English (fus)

Driver Controls

122

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 359 360

Pas de commentaire

Ford 2004 Expedition v.3 Manuel d'utilisateur Page 122