Ford 2012 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 64)

100

101

Scenario 3:

Conditions - The automatic high beam system is set to ON in the

message center. The headlamp switch is in

(off), (park lamps),

(on).

Operation - The high beam switch can be used to turn the high beams

on and off.

Scenario 4:

Conditions - The automatic high beam system is set to OFF in the

message center. The headlamp switch is

(autolamps), (off), (park lamps), or (on).

Operation - The high beam switch can be used to turn the high beams

on and off.

Enabling/disabling auto high beams

Enabling/disabling and/or checking the status of the automatic high beam

system can be performed using the message center. See Message center

in the Instrument cluster chapter.

Activating high beams

If there is no traffic in front of the vehicle, the high beams will come on

automatically and the

light will display in the instrument panel if

the following are true:

• The headlamp control is in auto lamp

mode.

• The ambient light level is low enough that high beams are needed.

• Vehicle speed must be greater than 32 mph (51 km/h).

• Severe weather is not detected.

Deactivating high beams

The automatic high beams will deactivate if any of the following events

occur:

• An approaching vehicle’s headlights or a preceding vehicle’s tail lamps

are detected.

• The headlamp control is moved out of the autolamps position.

• The vehicle speed falls below 27 mph (43 km/h).

• The ambient light level is high enough that high beams are not

needed.

• Severe rain, snow or fog is detected.

Lights

2012 Taurus

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Taurus v.2 Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Taurus v.2