Ford 2012 Taurus v.1 Manuel d'utilisateur télécharger pdf (Page 111)

5. Press SETUP to enter your choice. The next optional setting will be

displayed.

6. Repeat Steps 4 and 5 until you are done changing the optional

settings.

Clear MyKey威

To reset all MyKeys威 as admin keys, do the following:

1. Turn the vehicle on using the admin key.

2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.

3. Press and release the RESET button. HOLD RESET TO CONFIRM

CLEAR is displayed.

4. Press and hold the RESET button for two seconds until ALL MYKEYS

CLEARED is displayed.

Check MyKey威 system status

The vehicle system check will provide the status of the following MyKey威

parameters:

• MYKEY MILES — This odometer only tracks mileage when a MyKey威

is used. If mileage does not accumulate as expected, then the MyKey威

is not being used by the intended user. The only way to reset this

odometer to zero is by clearing MyKey威. If this odometer is lower than

the last time you checked, then the MyKey威 system has been recently

cleared.

• # MYKEY(S) PROGRAMMED — Indicates how many MyKeys威 are

programmed to the vehicle. Can be used to detect deletion of a

MyKey威.

• # ADMIN KEYS PROGRAMMED — Indicates how many admin keys

are programmed to the vehicle. Can be used to detect if an additional

spare key has been programmed to the vehicle.

Refer to Message center in the Instrument Cluster chapter for MyKey威

system warnings displays.

Using MyKey威 with remote start systems

MyKey威 is not compatible with non-Ford approved aftermarket remote

start systems. If you choose to install a remote start system please see

your authorized dealer for a Ford approved remote start system.

Locks and Security

111

2012 Taurus

Owners Guide, 1st Printing

USA (fus)

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 405 406

Pas de commentaire

Ford 2012 Taurus v.1 Manuel d'utilisateur Page 111