Ford 2012 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 73)

MULTI-FUNCTION LEVER

Windshield wiper: Rotate the end

of the control away from you to

increase the speed of the wipers;

rotate towards you to decrease the

speed of the wipers.

Speed dependent wipers (if equipped): When the wiper control is set

to any of the interval settings except the longest pause setting, the pause

time between wiping will automatically adjust with the vehicle speed.

The faster your vehicle is travelling the shorter the pause time between

wipes will become.

Rain-sensing wipers (if equipped): The rain-sensing wipers will

automatically activate when moisture is present on the windshield and

the multi-function switch is set to one of five auto/interval moisture

sensitivity settings. Rotate the end of the control toward the windshield

to increase the sensitivity. The speed of the rain-sensitive wipers will

vary based on the amount of moisture detected on the windshield and

the auto/interval setting. There are no interval (intermittent wipe)

settings on vehicles with rain-sensing wipers. The wipers will continue to

wipe as long as the presence of moisture is detected on the windshield.

More or less wiping may occur depending on humidity, mist or light rain,

or road spray.

Keep the outside of the windshield clean, especially the area around the

rear view mirror where the sensor is located or rain sensor performance

may be affected.

Note: During winter driving conditions with ice, snow or a salty road

mist, inconsistent or unexpected wiping or smearing may occur. In these

conditions, you can lower the sensitivity to reduce the amount of

smearing or override the feature by selecting low- or high-speed wiping

or turning the wiper system off.

Note: The wipers must be turned off before entering a car wash.

Driver Controls

2012 Fusion (fsn)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 374 375

Pas de commentaire

Ford 2012 Fusion v.1 Manuel d'utilisateur Page 73