Ford 2011 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 185)

If the fuse is not blown, perform the following procedure:

1. Apply the parking brake, turn the ignition to the accessory position.

2. Locate the access plug on the

underside of the steering column

cover.

3. Remove the access plug using a

flat head screwdriver. Insert the

screwdriver into the access hole

nearest the steering wheel. Then

press and hold the override button

using a flat head screwdriver. Apply

the brake pedal and shift the

transmission into N (Neutral) while

continuing to press the override

button.

4. Reinstall the access plug cover, start the vehicle and release the

parking brake.

WARNING: Do not drive your vehicle until you verify that the

brakelamps are working.

WARNING: Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

WARNING: If the parking brake is fully released, but the brake

warning lamp remains illuminated, the brakes may not be

working properly. See your authorized dealer.

AUTOMATIC TRANSMISSION OPERATION

Understanding the gearshift positions of the 4–speed automatic

transmission

P (Park)

This position locks the transmission

and prevents the rear wheels from

turning.

Driving

185

2011 Crown Victoria (cro)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 330 331

Pas de commentaire

Ford 2011 Crown Victoria v.2 Manuel d'utilisateur Page 185