Ford 2011 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 87)

Automatic disarming

Switching the ignition to the on position with a coded key disarms the

vehicle.

• The theft indicator on the instrument panel will illuminate for three

seconds and then go out.

• If the theft indicator stays on for an extended period of time or

flashes rapidly, contact your authorized dealer as soon as possible.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,

you will need to have your vehicle towed to an authorized dealer. The

key codes need to be erased from your vehicle and new coded keys will

need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

A maximum of eight keys can be coded to your vehicle. Only

SecuriLock威 keys can be used. To program a coded key yourself, you

will need two previously programmed coded keys (keys that already

operate your vehicle’s engine) and the new unprogrammed key(s) readily

accessible for timely implementation of each step in the procedure.

If two previously programmed coded keys are not available, you must

bring your vehicle to your authorized dealer to have the spare coded

key(s) programmed.

Please read and understand the entire procedure before you begin.

1. Insert the first previously

programmed coded key into the

ignition and turn the ignition from 1

(off) to the 3 (on) position

(maintain ignition in 3 (on) for at

least one second).

2. Turn ignition to 1 (off) and

remove the first coded key from

the ignition.

Locks and Security

2011 Crown Victoria (cro)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 330 331

Pas de commentaire

Ford 2011 Crown Victoria v.2 Manuel d'utilisateur Page 87