Ford 2011 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 13)

Service engine soon: The service

engine soon indicator light

illuminates when the ignition is first

turned on to check the bulb and to

indicate whether the vehicle is ready for Inspection/Maintenance (I/M)

testing. Normally, the service engine soon light will stay on until the

engine is cranked, then turn itself off if no malfunctions are present.

However, if after 15 seconds the service engine soon light blinks eight

times, it means that the vehicle is not ready for I/M testing. See the

Readiness for Inspection/Maintenance (I/M) testing in the

Maintenance and Specifications chapter.

Solid illumination after the engine is started indicates the on-board

diagnostics system (OBD-II) has detected a malfunction. Refer to

On-board diagnostics (OBD-II) in the Maintenance and Specifications

chapter. If the light is blinking, engine misfire is occurring which could

damage your catalytic converter. Drive in a moderate fashion (avoid

heavy acceleration and deceleration) and contact your authorized dealer

as soon as possible.

WARNING: Under engine misfire conditions, excessive exhaust

temperatures could damage the catalytic converter, the fuel

system, interior floor coverings or other vehicle components, possibly

causing a fire.

Powertrain malfunction

indicator (if equipped):

Illuminates when a powertrain fault

has been detected. Contact your

authorized dealer as soon as possible.

Check fuel cap (if equipped):

Illuminates when the fuel cap may

not be properly installed. Continued

driving with this light on may cause

the Service engine soon warning

light to come on. Refer to Fuel

filler cap in the Maintenance and Specifications chapter.

Instrument Cluster

2011 Crown Victoria (cro)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 330 331

Pas de commentaire

Ford 2011 Crown Victoria v.2 Manuel d'utilisateur Page 13