Ford 2010 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 289)

WARNING: Do not place objects or mount equipment in front of

the airbag module cover or in front of the seat areas that may

come in contact with a deploying airbag. Failure to follow this

instruction could result in personal injury.

WARNING: Dash, tunnel or console-mounted equipment should

not be placed outside of the specified zone. Failure to follow this

instruction could result in personal injury.

WARNING: Do not mount equipment between the side of front

seat to the door trim to block deployment of the side airbag.

Failure to follow this instruction could result in personal injury.

Some approximate dimensions for airbags, at full inflation, are provided

in Figures 1 through 5. These dimensions are somewhat flexible and

represent “free form” deployments without the loading of occupants. The

shaded areas in Figures 6 through 8 represent available police equipment

mounting zones. These zones are shown for police vehicles equipped

with standard bucket seats. While bench seats are optional and still

appropriate for vehicles with certain limited police equipment

requirements, the standard bucket seats are recommended for vehicles

that require maximum available space for police equipment mounting.

The zone dimensions provided in Figures 6 through 8 are approximate

and will vary with the loading of occupants in the seats.

All airbag and equipment mounting zone dimensions are approximate

due to different airbag deployment characteristics.

No equipment will mount between the side of the front seat and the

door trim to block deployment of the side airbag.

Crown Victoria Severe Duty

289

2010 Crown Victoria (cro)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 307 308

Pas de commentaire

Ford 2010 Crown Victoria v.2 Manuel d'utilisateur Page 289