Ford 2010 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 57)

100

101

5. Pull the bulb from the socket and

push in the new bulb.

6. Install the bulb socket into the

lamp assembly by rotating it

clockwise.

To complete installation, follow the

removal procedure in reverse order.

Replacing front sidemarker bulb

To remove the front side marker bulb:

1. Make sure headlamp switch is in the off position, then open the hood.

2. Remove the radiator cover by turning the three retainers to the unlock

position.

3. Remove the screw from the

outside of the lamp.

4. Remove the nut from inside the

lamp and pull the lamp assembly

away from the vehicle.

5. Rotate the bulb socket

counterclockwise and remove from

lamp assembly.

6. Carefully pull bulb straight out of

the socket and push in the new bulb

until it snaps, locking it into

position.

7. To complete installation, follow

the removal procedure in reverse

order.

Lights

2010 Crown Victoria (cro)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 307 308

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Crown Victoria v.2 Manuel d'utilisateur Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Crown Victoria v.2