Ford 2010 Crown Victoria v.2 Manuel d'utilisateur télécharger pdf (Page 158)

The Tire Pressure Monitoring System complies with part 15 of the FCC

rules and with RSS-210 of Industry Canada. Operation is subject to the

following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

WARNING: The Tire Pressure Monitoring System is NOT a

substitute for manually checking tire pressure. The tire pressure

should be checked periodically (at least monthly) using a tire gauge,

see Inflating your tires in this chapter. Failure to properly maintain

your tire pressure could increase the risk of tire failure, loss of control,

vehicle rollover and personal injury.

Changing tires with TPMS

Each road tire is equipped with

a tire pressure sensor fastened

to the inside rim of the wheel.

The pressure sensor is covered

by the tire and is not visible

unless the tire is removed. The

pressure sensor is located

opposite (180 degrees) from the

valve stem. Care must be taken

when changing the tire to avoid

damaging the sensor. It is

recommended that you always have

your tires serviced by an authorized

dealer.

The tire pressure should be checked

periodically (at least monthly) using

an accurate tire gauge, refer to

Inflating your tires in this chapter.

Tires, Wheels and Loading

158

2010 Crown Victoria (cro)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 307 308

Pas de commentaire

Ford 2010 Crown Victoria v.2 Manuel d'utilisateur Page 158