Ford 2005 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 238)

3. Carefully separate the two halves

of the air filter housing.

4. Remove the air filter element from the air filter housing.

5. Wipe the air filter housing and cover clean to remove any dirt or

debris and to ensure good sealing.

6. Install a new air filter element. Be

careful not to crimp the filter

element edges between the air filter

housing and cover. This could cause

filter damage and allow unfiltered

air to enter the engine if not

properly seated.

7. Replace the air filter housing cover and secure the clamps.

8. Replace the air inlet tube and secure the clamp.

Note: Failure to use the correct air filter element may result in severe

engine damage. The customer warranty may be voided for any damage to

the engine if the correct air filter element is not used.

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADING

New vehicles are fitted with tires

that have a rating on them called

Tire Quality Grades. The Quality

grades can be found where

applicable on the tire sidewall

between tread shoulder and

maximum section width. For

example:

• Treadwear 200 Traction AA Temperature A

2005 Escape (204)

Owners Guide (post-2002-fmt)

USA English (fus)

Maintenance and Specifications

238

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 271 272

Pas de commentaire

Ford 2005 Escape v.2 Manuel d'utilisateur Page 238