Ford 2004 Excursion v.1 Manuel d'utilisateur télécharger pdf (Page 244)

BRAKE FLUID

Checking and adding brake fluid

Brake fluid should be checked and

refilled as needed. Refer to the

scheduled maintenance guide for

the service interval schedules.

1. Clean the reservoir cap before

removal to prevent dirt or water

from entering the reservoir.

2. Visually inspect the fluid level.

3. If necessary, add brake fluid from

a clean un-opened container until

the level reaches MAX. Do not fill

above this line.

4. Use only a DOT 3 brake fluid

certified to meet Ford specification ESA-M6C25–A. Refer to Lubricant

specifications in this chapter.

Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes

with running water for 15 minutes. Seek medical attention if

irritation persists. If taken internally, drink water and induce vomiting.

Seek medical attention immediately.

If you use a brake fluid that is not DOT 3, you will cause

permanent damage to your brakes.

Do not let the reservoir for the master cylinder run dry. This

may cause the brakes to fail.

Maintenance and Specifications

244

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 271 272

Pas de commentaire

Ford 2004 Excursion v.1 Manuel d'utilisateur Page 244