Ford 2003 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 58)

To remove the bed extender:

1. Extend the bed extender.

2. Pull the round knobs on each side

of the extender to unlock it.

Make sure the locking clip screws

are loose before removing the

extender.

3. Press the locking clips below the

middle bar on each side and lift the

extender out of the bed.

To install the bed extender, follow the removal procedure in reverse

order.

TONNEAU COVER (IF EQUIPPED)

The tonneau cover has been designed to maximize fuel economy and

should be fully installed whenever possible.

The rear panel can be folded in half and secured behind the cab, or the

whole cover can be removed completely from the vehicle.

To avoid damage to the cover, do not operate the vehicle unless

the cover is fully installed, or securely stowed.

To open the front panel:

• Open the lock cover and unlock

the front or rear panel.

• Lift the panel to access items in

the pickup box.

The panels will automatically

lock when lowered onto the

pickup box.

• To close, lower the front or rear

panel down on the pickup box.

Driver Controls

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 247 248

Pas de commentaire

Ford 2003 Ranger v.2 Manuel d'utilisateur Page 58