Ford 2003 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 124)

Using the N (Neutral) position

The transfer case N (Neutral) position overrides the transmission

and puts the vehicle in neutral regardless of transmission

gearshift lever position. The vehicle can move forward or

backward.

This position should only be used when towing the vehicle.

Do not leave the vehicle unattended with the transfer case in the

N (Neutral) position. Always set the parking brake fully and turn

off the ignition when leaving the vehicle.

Using the electronic shift 4WD system (if equipped)

2WD (2WD High) - Power to the rear wheels only; used for street and

highway driving.

4X4 HIGH (4WD High) - Used for extra traction such as in snow or icy

roads or in off-road situations. Not intended for use on dry pavement.

4X4 LOW (4WD Low) - Uses extra gearing to provide maximum power

to all four wheels. Intended only for off-road applications such as deep

sand, steep grades or pulling heavy objects. 4L (4WD Low) will not

engage while the vehicle is moving; this is normal and should be no

reason for concern. Refer to Shifting to/from 4L (4WD Low) for proper

operation.

Shifting between 2WD (2WD High) and 4X4 HIGH (4WD High)

• Move the 4WD control between 2WD and 4X4 HIGH at any forward

speed.

Note: Do not perform this operation if the rear wheels are slipping.

Shifting to/from 4X4 LOW (4WD Low)

1. Bring the vehicle to a complete stop

2. Depress the brake

4X4

HIGH

2WD

4X4

LOW

Driving

124

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 247 248

Pas de commentaire

Ford 2003 Ranger v.2 Manuel d'utilisateur Page 124