Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 13Entertainment Systems 16AM/FM stereo cassette with CD 16AM/FM stereo with CD
WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa
bend comfortably. Booster seats also make the shoulder belt fit betterand more comfortably for growing children.When children should use booster seats
• Those with a high back.If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boo
SAFETY SEATS FOR CHILDRENChild and infant or child safety seatsUse a safety seat that is recommended for the size and weight of thechild. Carefully fo
Carefully follow all of the manufacturer’s instructions includedwith the safety seat you put in your vehicle. If you do not installand use the safety
2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro
5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a
Installing child safety seats in the lap belt seating positions1. Lengthen the lap belt. To lengthen the belt, hold the tongue so that itsbottom is pe
1. Position the child safety seat on the seat cushion.2. Route the child safety seat tether strap over the back of the seat.For vehicles with adjustab
Attaching safety seats with LATCH (Lower Anchors and Tethers forChildren) attachments for child seat anchorsSome child safety seats have two rigid or
The lower anchors for child seatinstallation are located at the rearsection of the rear seat between thecushion and seat back. The LATCHanchors are be
Brake system warning light: Toconfirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the ON
STARTINGPositions of the ignition1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning.2. LOCK, lo
Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,
• Make sure the gearshift is in P(Park).• Turn the key to 4 (ON) withoutturning the key to 5 (START).Make sure the corresponding lights illuminate or
3. If the temperature is below -12° C (10° F) and the engine does notstart in 15 seconds on the first try, turn the key OFF and wait 10seconds and try
-23° C (-10° F) or below. For best results, plug the heater in at leastthree hours before starting the vehicle. The heater can be plugged in thenight
full steering control during hard braking and on slippery surfaces.However, the ABS does not decrease stopping distance.ABS warning lampABSTheABSlamp
During Traction Control娂 operation,the traction control active light willilluminate, you may hear an electricmotor type of sound coming fromthe engine
AUTOMATIC TRANSAXLE OPERATIONBrake-shift interlockThis vehicle is equipped with a brake-shift interlock feature that preventsthe gearshift lever from
Driving with an automatic overdrive transaxleYour automatic overdrive transaxleprovides fully automatic operation ineither(Overdrive) or D (Drive).Dri
Understanding the gearshift positions of the 4–speed automatictransaxleYour transaxle is equipped with an adaptive learning strategy found inthe vehic
Engine oil pressure: Illuminateswhen the oil pressure falls below thenormal range, refer to Engine oil inthe Maintenance andspecifications chapter.Low
Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position andremove the key wheneve
If your vehicle gets stuck in mud or snowIf your vehicle gets stuck in mud or snow, it may be rocked out byshifting from forward and reverse gears, st
• GAWR (Gross Axle Weight Rating): Carrying capacity for each axlesystem. The GAWR is specific to each vehicle and is listed on theSafety Certificatio
TRAILER TOWINGYour vehicle is classified as a light duty towing vehicle. The amount ofweight you can safely tow depends on the type of engine you have
3.0L 4-Valve Duratec EngineModel PassengerLoad - #/kg (lbs.)LuggageLoad - kg (lbs.)Max TrailerWt.- kg (lbs.)Sedan 5/340 (750) 0 590 (1300)2/135 (300)
Trailer brakesElectric brakes and manual, automatic or surge-type trailer brakes aresafe if installed properly and adjusted to the manufacturer’sspeci
• The trailer tongue weight should be 10–15% of the loaded trailerweight.• After you have traveled 80 km (50 miles), thoroughly check yourhitch, elect
GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program
Canadian customers who require roadside assistance, call1–800–665–2006.If you need to arrange roadside assistance for yourself, Ford MotorCompany will
If your vehicle is a sedan, the fuelpump shut-off switch is located onthe right side of the trunk behindthe trunk liner.If your vehicle is a wagon, th
Turn signal: Illuminates when theleft or right turn signal or thehazard lights are turned on. If theindicators stay on or flash faster, check for a bu
FUSESIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinthe fuse. Check th
To remove a fuse use the fuse puller tool provided on the fuse panelcover.The fuses are coded as follows.Fuse/relaylocationFuse ampratingPassenger com
Fuse/relaylocationFuse ampratingPassenger compartment fuse paneldescription15 30A Front wiper motor16 15A Flasher and GEM power, ICP power, RCCmemory,
Fuse/relaylocationFuse ampratingPassenger compartment fuse paneldescription36 15A Turn signals, Back-up lamps37 15A Transmission position switch38 5A
The high-current fuses are coded as follows.Fuse/relaylocationFuse ampratingPower distribution box description1 60A** Fuse junction panel2 30A** Power
Fuse/relaylocationFuse ampratingPower distribution box description20 — Not used21 15 A* Left headlamp22 10A* A/C clutch relay, PCM keep alive power23
If you use the temporary spare tire continuously or do not followthese precautions, the tire could fail, causing you to lose controlof the vehicle, po
If the vehicle slips off the jack, you or someone else could beseriously injured.2. Place gearshift lever in P (Park),turn engine OFF, block thediagon
3. If equipped with a wheel coverthat’s bolted on, loosen the fiveplastic nuts with the lug nutwrench.4. Remove the center ornament or wheel cover fro
10. Remove the jack and fullytighten the lug nuts in the ordershown.11. Return the flat tire, jack and lugwrench to their proper storagelocations. Mak
Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature, the needle will be inthe normal range (between “
may have firm and/or soft shifts. This operation is considered normal andwill not affect function or durability of the transmission. Over time, theada
2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat
4. Make the final connection of the negative (-) cable. Make theconnection to an exposed metal part of the stalled vehicle’s engine, awayfrom the batt
Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
GETTING THE SERVICES YOU NEEDAt homeFord Motor Company and Ford of Canada have authorized dealerships toservice your vehicle. It is preferred that you
In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo
In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a
• available free to owners and lessees of qualifying Ford Motor Companyvehicles.The Dispute Settlement Board may not be available in all states. FordM
Tachometer: Indicates the enginespeed in revolutions per minute.Driving with your tachometerpointer continuously at the top ofthe scale may damage the
• A Ford or Lincoln Mercury dealership representativeConsumer candidates for Board membership are recruited and trained byan independent consulting fi
before the Board, this is not a requirement and the Board will decide thecase whether or not an oral presentation is made. An oral presentationmay be
The CAMVAP program is a straight-forward and relatively speedyalternative to resolve a disagreement when all other efforts to produce asettlement have
If you are in another foreign country, contact the nearest Forddealership. If the dealership employees cannot help you, they can directyou to the near
California Civil Code Section 1793.22(b) presumes that the manufacturerhas had a reasonable number of attempts to conform the vehicle to itsapplicable
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is
• Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips.• Always
• 3.0L Vulcan engine• 3.0L Duratec engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage.PL
WINDOWS AND WIPER BLADESThe windshield, rear window and wiper blades should be cleanedregularly. If the wiper does not wipe properly, substances on th
INTERIORFor fabric, carpets, cloth seats, safety belts and seats equipped with sideair bags:• Remove dust and loose dirt with a vacuum cleaner.• Remov
AM/FM STEREO1. Clock: To set the hour, press andhold the H control. When thedesired hour appears, release thecontrol.To set the minute, press and hold
FORD, LINCOLN AND MERCURY CAR CARE PRODUCTSYour Ford, Lincoln or Mercury dealer has many quality products availableto clean your vehicle and protect i
SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide a
OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel.2. Go to the front of the vehicle a
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.0L V6 Vulcan engine1. Automatic transmission fluid dipstick2. Brake fluid reservoir3. Air filter ass
3.0L DOHC V6 Duratec engine1. Automatic transmission fluid dipstick2. Brake fluid reservoir3. Air filter assembly4. Battery5. Engine oil dipstick6. En
WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer
Checking and adding washer fluid for the liftgate (if equipped)The opening for the reservoir islocated on the passenger side underthe tail lamp. Refil
5. Locate and carefully remove theengine oil indicator (dipstick).6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.• If th
Adding engine oil1. Check the engine oil. For instructions, refer to Checking the engineoil in this chapter.2. If the engine oil level is not within t
that does not meet Ford material and design specifications, start-upengine noises or knock may be experienced.It is recommended you use the appropriat
AM/FM1/FM2; tune to a station, press and hold a preset button untilsound returns.8. Tune: Press/ to changefrequency down/up.9. Seek: Press and release
When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a
• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin
When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “cold fill level” or within the “c
Do not put engine coolant in the windshield washer fluidcontainer. If sprayed on the windshield, engine coolant couldmake it difficult to see through
For vehicles with overflow coolant systems with a non-pressurized capon the coolant recovery system, add coolant to the coolant recoveryreservoir when
Recycled engine coolantFord Motor Company recommends the use of a recycled engine coolantproduced by Ford-approved processes in vehicles originally eq
• Decreased engine coolant concentrations below 40% willdecrease the corrosion protection characteristics of the enginecoolant and may cause engine da
Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforefueling your vehicle.• Alwa
and sugar cane. When ethanol is used in the making of motor fuels, asmall amount of a bad tasting chemical is added to discourage beverageuse. The res
• DO NOT use a device that would hold the fuel pump handle in the fillposition.Fuel Filler CapYour fuel tank filler cap has an indexed design with a 1
2. Clock: To set the hour, press andhold the H control. When thedesired hour appears, release thecontrol.To set the minute, press and holdthe M contro
Do not use fuel containing methanol. It can damage critical fuel systemcomponents.Your vehicle was not designed to use fuel or fuel additives with met
Fuel qualityMany of the world’s automakersissued the World-wide Fuel Charterthat recommends gasolinespecifications to provide improvedperformance and
Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality.Running out of fuelAvoid running out of fuel becaus
amount of fuel in a full tank and a tank when the fuel gauge indicatesempty. Empty reserve is the small amount of fuel remaining in the fueltank after
economy under current driving conditions. Additionally, keeping recordsduring summer and winter will show how temperature impacts fueleconomy. In gene
• Perform all regularly scheduled maintenance items. Follow therecommended maintenance schedule and owner maintenance checksfound in your vehicle sche
• Avoid running out of fuel.• Do not turn off the ignition while your vehicle is moving, especially athigh speeds.• Have the items listed in your sche
environment by ensuring that your vehicle continues to meetgovernment emission standards. The OBD-II system also assists theservice technician in prop
CHECKING AND ADDING POWER STEERING FLUIDCheck the power steering fluid.Refer to the scheduled maintenanceguide for the service intervalschedules. If a
3.0L DOHC V6 Duratec engine4. Check the fluid level in thereservoir. It should be between theMIN and MAX lines. Do not addfluid if the level is within
11. Dolby威 noise reduction:Reduces tape noise and hiss whileplaying a tape, press toactivate/deactivate.12. Side 1–2: Press to change tapedirection.13
1. Drive the vehicle 30 km (20 miles) or until it reaches normal operatingtemperature.2. Park the vehicle on a level surface and engage the parking br
Use of a non-approved automatic transmission fluid may causeinternal transaxle component damage.If necessary, add fluid in 250 mL (1/2 pint) increment
and one-half (1 1/2) times as well on the government course as a tiregraded 100. The relative performance of tires depends upon the actualconditions o
• Adjust tire pressure to recommended specifications found on theCertification Label located on the driver’s door panel.Improperly inflated tires can
When replacing full size tires, never mix radial bias-belted, orbias-type tires. Use only the tire sizes that are listed on theCertification or Tire L
• Remove the tire cables when they are no longer needed. Do not usetire cables on dry roads.• The suspension insulation and bumpers will help prevent
REFILL CAPACITIESFluid Ford PartNameApplication CapacityBrake fluid MotorcraftHighPerformanceDOT 3 MotorVehicle BrakeFluidAll Fill to line onreservoir
Fluid Ford PartNameApplication CapacityAutomatictransaxle -AX4SMotorcraftMERCON威VATF3.0L V6 Vulcanengine11.6L (12.2quarts)Windshieldwasher fluid -Fron
ItemsFord PartName orequivalentFord PartNumberFordSpecificationAutomatictransaxle (AX4Sand 4F50N1)MotorcraftMERCON威VATFXT-5-QMMERCON威VEngine oil Motor
MERCON威 and MERCON威 V type fluids are not interchangeable.DO NOT mix MERCON威 and MERCON威 V. Use of a transmissionfluid that indicates dual usage (MERC
Seating and Safety Restraints 74Seating 74Safety restraints 78Air bags 92Child restraints 98Driving 110Starting 110Brakes 114Traction control 115Trans
21. EJ (Eject): Press to eject atape.AUDIO SYSTEM WITH AM/FM STEREO/SINGLE CD PLAYER1. Clock: To set the hour, press andhold the H control. When thede
52341Maintenance and Specifications200
IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Certification label be affixedt
Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel. (Plea
FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of genuine Ford accessories are available for yourvehicle through your local authorized Ford, Lincol
Travel equipmentElectrochromic inside mirror with compassElectrochromic inside mirror with compass and temperatureEmergency kitFactory luggage rack ad
For maximum vehicle performance, keep the following information inmind when adding accessories or equipment to your vehicle:• When adding accessories,
AAccessory delay ...49Air bag supplemental restraintsystem ...92–93, 96and child safety seats ...
instrument panel ...158interior ...158–159interior trim ...159plastic parts ...
FFlexible Fuel Vehicle (FFV) ...176Floor mats ...56Fluid capacities ...196Fuel ...
Jump-starting your vehicle ...139KKeyless entry system ...67Keyspositions of the ignition ...110LLampsautolamp system ...
5. Fade: Press / to shiftsound to the rear/front speakers.6. Scan: Press to hear a briefsampling of all listenable radiostations or CD tracks. Press a
locking/unlocking doors ...61opening the trunk ...64Roadside assistance ...127Roof rack ...
Warning lights (see Lights) ...10Washer fluid ...165Water, Driving through ...121Windowspower ...
213
214
215
216
15. Power/volume: Press to turnON/OFF; turn to increase ordecrease volume levels.16. EJ (Eject): Press to eject a CD.17. AM/FM: Press to choose afrequ
5. Line up the CD with the grooveof the disc holder. Ensure that thelabel on the CD faces downwards.6. Press the disc holder until it lockssecurely in
• Remove loose labels before inserting tapes.• Allow tapes which have been subjected to extreme heat, humidity orcold to reach a moderate temperature
MANUAL HEATING AND AIR CONDITIONING SYSTEM1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Air flow selections: Contr
• Do not put objects under the front seats that will interfere with theairflow to the back seats.• Remove any snow, ice or leaves from the air intake
2. Outside temp control: Press todisplay the outside air temperature.Press again to return to interiortemperature. Exterior readings are most accurate
10. : Distributes air through the windshield defroster ducts and floorducts. The system will automatically provide outside air to reducewindow fogging
REAR WINDOW DEFROSTERThe rear defroster control is locatedon the instrument panel.Press the rear defroster control toclear the rear window of thin ice
Accessories 203Index 206All rights reserved. Reproduction by any means, electronic or mechanicalincluding photocopying, recording or by any informatio
HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola
High beamsPush the lever toward theinstrument panel to activate. Pullthe lever towards you to deactivate.Flash to passPull toward you slightly to acti
AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident the alignment of yo
To see a clearer light pattern foradjusting, you may want to blockthe light from one headlamp whileadjusting the other.5. Locate the vertical adjuster
INTERIOR LAMPSREPLACING THE INTERIOR BULBSCheck the operation of all bulbs frequently.Dome lamps and map lamps• ON orD: The dome light willstay on.• D
Rear dome lamp (if equipped)The dome lamp lights when:• any door is opened with thecontrol in the middle position.• the instrument panel dimmerswitch
Function Number of bulbs Trade numberLicense plate lamp 2 168High-mount brake lamp(wagon)2 912High-mount brake lamp(sedan)Must replace the hi-mount br
Replacing headlamp bulbsTo remove the headlamp bulb:1. Make sure headlamp switch is inOFF position.2. Remove the bolt from theheadlamp housing.3. At t
5. Disconnect the electricalconnector from the bulb by pullingrearward.6. Remove the bulb retaining ring byrotating it counterclockwise.7. Remove the
2. Install the bulb retaining ring over the plastic base and lock the ringby rotating clockwise until it snaps into place.3. Connect the electrical co
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
5. Carefully pull bulb straight out ofthe socket and push in the newbulb.6. Install the bulb socket into thelamp assembly by rotating itclockwise.7. C
Replacing high-mount brakelamp bulbs — Wagon only1. Open liftgate.2. Remove two screw covers, screwsand handle from liftgate.3. Remove two screws and
7. Carefully lift the lamp assemblyaway from the liftgate.8. Remove the bulb socket byrotating it counterclockwise andpulling it out from the lampasse
3. On the underside of the spoiler,remove the two decorative screwcovers (on the LED module).4. Remove the two screws that areholding the LED module i
Sedan1. Make sure headlamp switch is inOFF position and remove twoscrews, grommets and the licenseplate lamp assembly from the trunklid.2. Carefully p
6. Install the bulb socket into the lamp assembly by rotating it clockwise.7. Install the lamp assembly on the vehicle with three nut and washerassemb
MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the
Changing the wiper blades1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Push the lockpin manually to releas
ILLUMINATED VISOR MIRROR (IF EQUIPPED)To turn on the visor mirror lamps,lift the mirror cover. Adjust theamount of light by sliding thecontrol.AUXILIA
One touch downAllows the driver’s window to openfully without holding the controldown. Press completely down onAUTO and release quickly. Pressagain to
SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury and prevent possibledamage to others, you
The mirror will automatically return to the normal state whenever thevehicle is placed in R (Reverse)(when the mirror is on) to ensure abright clear v
2. With the compass display turnedon, press and hold the COMP side ofthe control for no more than fiveseconds until the zone selectionnumber appears i
Heated outside mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not re
Setting speed controlThe controls for using your speedcontrol are located on the steeringwheel for your convenience.1. Press the ON control and releas
Increasing speed while using speed controlThere are three ways to set a higherspeed:• Press and hold the SET + controluntil you get to the desiredspee
Indicator lightThis light comes on when either theSET or RES controls are pressed. Itturns off when the speed controlOFF control is pressed, the brake
If your vehicle is equipped with the column shift and a bench seat, it hasa center console in the center front seating position.The center console has
INTERIOR TRUNK CONTROL (IF EQUIPPED)Press the remote trunk releasecontrol on the instrument panel tothe left of the steering wheel.LIFTGATE (WAGON ONL
CARGO AREA FEATURESStorage compartmentYour vehicle comes equipped with astorage compartment in the floor ofthe cargo area. An additionalcompartment is
Do not place any objects on the cargo area cover. They mayobstruct your vision or strike occupants of the vehicle in thecase of a sudden stop or colli
SPECIAL NOTICESEmission warrantyThe New Vehicle Limited Warranty includes Bumper-to-BumperCoverage, Safety Restraint Coverage, Corrosion Coverage, and
The cover may cause injury in a sudden stop or accident if it isnot securely installed.Cargo utility hooks (Sedan)The utility hooks located in side th
KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w
To open the luggage compartmentdoor (lid) from within the luggagecompartment, pull the illuminated“T” shaped handle and push up onthe trunk lid. The h
Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment.The rem
If any of the doors or liftgate (wagon) are not properly closed the hornwill make two quick chirps.Sounding a panic alarmPressto activate the alarm. T
Replacing lost remote entry transmittersIf you would like to have your remote entry transmitter reprogrammedbecause you lost one, or would like to buy
The illuminated entry system will turn off the interior lights if:• the ignition switch is turned to the ON position, or• the remote transmitter lock
You may also perform the following power door lock sequence toenable/disable the perimeter lamps feature:1. Turn the ignition to ON, then press the po
• The factory set code will work even if you have set your own personalcode.• If you set a second personal code it will erase your first personal code
To deactivate/reactivate the autolock feature using the power doorunlock controlYou must complete steps 1-7 within 30 seconds or the procedure willhav
Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.Please read the section Supplemental Restraint
Note: Large metallic objects, electronic devices that are used topurchase gasoline or similar items, or a second coded key on the samekey chain may ca
Replacing coded keys can be very costly. Store an extra programmed keyaway from the vehicle in a safe place to help prevent anyinconveniences. Please
9. Your new unprogrammed key is now programmed.If the key has been successfully programmed it will start the vehicle’sengine and the theft indicator l
Disarming the systemYou can disarm the system by any of the following actions:• Unlock the doors by pressing thecontrol on your remote entrytransmitte
SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a
Using the manual lumbar support (if equipped)The lumbar control is located on thefront of the seat cushion.Turn to adjust lumbar support.Adjusting the
Adjusting the front power seat (if equipped)The control is located on the outboard side of the seat cushion.Press to raise or lower the frontportion o
Make sure that the safety belt for the rear center passenger is properlyrouted over the rear seatback.3rd seat (wagon only)The third seat faces the re
To close the seat, make sure the safety belts are properly stowed, thenlift the remote latch release and push the seat down until it latches. Pullup o
collisions, not rollovers, side-impacts, or rear-impacts unless the collisioncauses sufficient longitudinal deceleration.Driver and passenger dual-sta
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-
risk of force-related injuries to the occupant’s chest by limiting the loadon the occupant. Refer to Safety Belt section in this chapter.Determining i
It is extremely dangerous to ride in a cargo area, inside oroutside of a vehicle. In a collision, people riding in these areasare more likely to be se
2. To unfasten, push the releasebutton and remove the tongue fromthe buckle.Energy management retractorsYour vehicle has a seat belt system equipped w
How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt
After any vehicle collision, the seat belt system at all outboardseating positions (except driver, which has no “automatic lockingretractor” feature)
then adapt the air bag deployment or safety belt pretensioner activationbased upon safety belt usage.The Personal Safety System provides the most bene
Insert the tongue into the correctbuckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen the belt, turn thetongue at a righ
shoulder and chest. Be sure the belt is not twisted. If the belt is twisted,remove the twist. Insert the tongue into the proper buckle for yourseating
Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignition switchis turned to the ON position...The safety belt wa
The following are reasons most often given for not wearing safety belts:(All statistics based on U.S. data)Reasons given... Consider...“Crashes are ra
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng
Do not sit on top of a buckled safety belt to avoid the BeltMinder chime. Sitting on the safety belt will increase the risk ofinjury in an accident. T
4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.5. Buckle then unbuckle the safety belt three times, ending with thesafety belt u
equipped), child safety seat LATCH and tether anchors, and attachinghardware, should be inspected after a collision. Ford Motor Companyrecommends that
• one or more impact and safing sensors.• the same indicator light, RCM (restraints control module) anddiagnostic unit used for the Personal safety sy
Steps you can take to properly position yourself away from the airbag:• Move your seat to the rear as far as you can while still reaching thepedals co
Children and air bagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rea
are not properly restrained or are otherwise out of position at the timeof air bag deployment. Thus, it is extremely important that occupants beproper
Do not use accessory seat covers. The use of accessory seatcovers may prevent the deployment of the side air bags andincrease the risk of injury in an
The air bag SRS is designed to activate when the vehicle sustains lateraldeceleration sufficient to cause the sensors to close an electrical circuitth
or younger and who weigh 18 kg [40 lbs] or less) ride in your vehicle,you must put them in safety seats made especially for children. Checkyour local
Commentaires sur ces manuels