Ford 2003 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 123)

Using a manual 4WD system (if equipped)

2H (2WD High) – Power to the rear wheels only; used for street and

highway driving.

4H (4WD High) – Used for extra traction such as in snow or icy roads

or in off-road situations. Not intended for use on dry pavement.

N (Neutral) – No power to either front or rear wheels.

4L (4WD Low)– Uses extra gearing to provide maximum power to all

four wheels at reduced speeds. Intended only for off-road applications

such as deep sand, steep grades or pulling heavy objects. 4L (4WD Low)

will not engage while the vehicle is moving; this is normal and should be

no reason for concern. Refer to Shifting to/from 4L (4WD Low) for

proper operation.

Shifting between 2H (2WD high) and 4H (4WD high)

• Move the transfer case lever to 4H (4WD High) at a stop or any

forward speed.

Note: Do not perform this operation if the rear wheels are slipping.

Shifting to/from 4L (4WD Low)

1. Bring the vehicle to a complete stop.

2. Depress the brake.

3. On vehicles equipped with an automatic transmission, place the

transmission in N (Neutral); on vehicles equipped with a manual

transmission, depress the clutch.

4. Move the transfer case lever through N (Neutral) directly to the

desired position. The 4WD LOW indicator will illuminate once the

transfer case has engaged.

• If the transfer case does not engage, repeat steps 1 through 4.

Driving

123

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 247 248

Pas de commentaire

Ford 2003 Ranger v.2 Manuel d'utilisateur Page 123