Ford 2003 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 80)

To deactivate/reactivate the autolock feature using the keypad

Your vehicle comes with the autolock feature activated. To

deactivate/reactivate this feature:

1. Turn the ignition to the OFF position.

2. Close all the doors.

3. Enter the 5-digit entry code.

4. Press and hold the 3 • 4. While holding the 3 • 4 press the 7 • 8.

5. Release the 3 • 4.

6. Release the 7 • 8.

The horn will chirp once when the system has been successfully

deactivated.

The horn will chirp twice (one short and one long chirp) when the

system has been successfully reactivated.

KEYLESS ENTRY SYSTEM (IF EQUIPPED)

You can use the keyless entry

keypad to:

• lock or unlock the doors without

using a key.

• activate or deactivate the autolock feature.

The keypad can be operated with the factory set 5–digit entry code; this

code is located on the owner’s wallet card in the glove box, is marked on

the computer module, and is available from your authorized dealer. You

can also create your own 5–digit personal entry code.

When pressing the controls on the keypad, press the middle of the

controls to ensure a good activation.

Programming a personal entry code

To create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered

within five seconds of each other.

1 2

45678

Locks and Security

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 271 272

Pas de commentaire

Ford 2003 F-150 v.2 Manuel d'utilisateur Page 80