Ford 2003 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 139)

This position locks the transmission and prevents the rear wheels from

turning.

To put your vehicle in gear:

• Start the engine

• Depress the brake pedal

• Move the gearshift lever into the desired gear

To put your vehicle in P (Park):

• Come to a complete stop

• Move the gearshift lever and securely latch it in P (Park)

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.

Always come to a complete stop before shifting into and out of R

(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is

free to roll. Hold the brake pedal down while in this position.

(Overdrive)

The normal driving position for the best fuel economy. Transmission

operates in gears one through four.

(Overdrive) can be deactivated

by pressing the transmission control switch on the end of the gearshift

lever. This will illuminate the O/D OFF lamp and activate Drive.

Drive (not shown)

Drive is activated when the transmission control switch is pressed.

• This position allows for all forward gears except overdrive.

• O/D OFF lamp is illuminated.

• Provides engine braking.

• Use when driving conditions cause excessive shifting from O/D to

other gears. Examples: city traffic, hilly terrain, heavy loads, trailer

towing and when engine braking is required.

• To return to O/D (Overdrive), press the transmission control switch.

The O/D OFF lamp will not be illuminated.

Driving

139

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 271 272

Pas de commentaire

Ford 2003 F-150 v.2 Manuel d'utilisateur Page 139