Ford 2003 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 263)

• Never use the front or rear differential as a jacking point.

6. Remove the lug nuts with the lug wrench.

7. Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall the lug nuts until the wheel is snug against the

hub. Do not fully tighten the lug nuts until the wheel has been lowered.

8. Lower the wheel by turning the jack handle counterclockwise.

9. Remove the jack and fully tighten

the lug nuts in the order shown and

reinstall the wheel cover.

10. Unblock the wheels.

11. Put flat tire, jack, lug wrench

and tools away. Make sure the jack

is fastened securely so it does not

rattle when you drive.

12. Turn on the air suspension

switch (if equipped).

Stowing the spare tire

1. Lay the tire on the ground, near the rear of the vehicle, with the valve

stem side facing up.

2. Slide the wheel partially under

the vehicle and install the retainer

through the wheel center. After

doing so, pull on the cable to align

the components at the end of the

cable.

3. Assemble the jack handle and

winch extension (as shown in

illustration), then insert the winch

extension through the access hole

behind the 3rd row seat and engage

the winch.

4. Turn the jack handle clockwise

until the tire is raised to its stowed

position underneath the vehicle. The

wrench will become harder to turn and the spare tire winch will ratchet

or slip when the tire is raised to maximum tightness. A clicking sound

will be heard from the winch indicating that the tire is properly stowed.

Roadside Emergencies

263

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 343 344

Pas de commentaire

Ford 2003 Expedition v.3 Manuel d'utilisateur Page 263