Ford 2003 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 312)

100

101

Allow the vehicle to sit for at least eight hours without starting the

engine. Then, start the engine and complete the above driving cycle. The

engine must warm up to its normal operating temperature. Once started,

do not turn off the engine until the above driving cycle is complete.

CHECKING AND ADDING POWER STEERING FLUID

Check the power steering fluid. Refer to the scheduled maintenance

guide for the service interval schedules. If adding fluid is necessary, use

only Ford Premium Power Steering Fluid or MERCON威 ATF.

1. Start the engine and let it run

until it reaches normal operating

temperature (the engine coolant

temperature gauge indicator will be

near the center of the normal area

between H and C).

2. While the engine idles, turn the

steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the

reservoir. It should be between the

MIN and MAX lines. Do not add

fluid if the level is in this range.

5. If the fluid is low, add fluid in

small amounts, continuously

checking the level until it reaches

the range between the MIN and

MAX lines. Be sure to put the cap

back on the reservoir.

MAX

MIN

MAX

MIN

Maintenance and Specifications

312

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 343 344

Commentaires sur ces manuels

Pas de commentaire

Ford 2003 Expedition v.3 Manuel d'utilisateur Page 312

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2003 Expedition v.3