Ford 2003 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 126)

Compass

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antennas.

Magnetic or metallic objects placed in, on or near the vehicle may also

affect compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to Compass zone adjustment.

Compass zone adjustment

1. Determine which magnetic zone

you are in for your geographic

location by referring to the zone

map.

2. Turn ignition to the ON position.

3. Start the engine.

4. Press the TRIP/RESET button

(near your odometer display), hold

for six seconds and release. You will

see that ZONE appears in the

instrument cluster display.

5. Press and release the button until

the desired zone number appears.

Note: The range of zone values are from 01 to 15 and “wraps” back to 01.

6. When you get to the desired ZONE number, hold the TRIP/RESET

button down to “lock in” the new value.

The cluster display will return to the “normal” mode when the

TRIP/RESET button has not been pressed for 6 seconds.

123

6 7 8 9 1011

Driver Controls

126

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 343 344

Pas de commentaire

Ford 2003 Expedition v.3 Manuel d'utilisateur Page 126