Ford 2003 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 127)

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and

high voltage lines. For optimum calibration, turn off all electrical

accessories (heater/air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

1. Start the vehicle.

2. To enter the compass calibration

mode, press and hold the

TRIP/RESET button for greater than

eight seconds. The display will then

show CAL in the display window.

3. Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until

CAL indicator turns off. As many as 5 complete circles may be required.

4. The compass is now calibrated.

MESSAGE CENTER (IF EQUIPPED)

With the ignition in the ON position,

the message center, located on your

instrument cluster, displays

important vehicle information

through a constant monitor of

vehicle systems. You may select

display features on the message center for a display of status preceded

by a brief indicator chime. The system will also notify you of potential

vehicle problems with a display of system warnings followed by a long

indicator chime.

Selectable features

Reset

Press this control to select and reset

functions shown in the INFO menu

and SETUP menu.

Driver Controls

127

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 343 344

Pas de commentaire

Ford 2003 Expedition v.3 Manuel d'utilisateur Page 127