Ford 2003 Expedition v.3 Manuel d'utilisateur télécharger pdf (Page 103)

100

101

Replacing foglamp bulbs

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

1. Remove the bulb socket from the

foglamp by turning counterclockwise.

2. Disconnect the electrical

connector from the foglamp bulb.

3. Connect the new foglamp bulb to

the electrical connector.

4. Install the bulb socket in the foglamp turning clockwise.

High-mount brakelamp

To change the high-mount

brakelamp bulbs:

1. Remove the two screws holding

the lamp assembly in place.

2. Pull the lamp assembly straight out.

3. Remove the wire harness.

4. Depress the four tabs that hold

the light assembly on, one at a time,

and pull the black bulb carrier away

from the lamp.

5. Pull the old bulb out and replace

with the new bulb.

6. Snap the black bulb carrier into

the lamp assembly.

7. Replace the wire harness.

8. Replace the lamp assembly.

Lights

103

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 343 344

Commentaires sur ces manuels

Pas de commentaire

Ford 2003 Expedition v.3 Manuel d'utilisateur Page 103

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2003 Expedition v.3