Ford 2002 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 71)

4. On the wall or screen you will

observe a light pattern with a

distinct horizontal edge of high

intensity light towards the right. If

this edge is not at the horizontal

reference line, the beam will need to

be adjusted.

5. Locate the vertical adjuster on

the headlamp, then usea7mmhex

socket or T20 Torx driver to turn the adjuster either counterclockwise

(to adjust down) or clockwise (to adjust up) aligning the upper edge of

the light pattern to the horizontal line.

6. Move the opaque cloth to cover the right-hand headlamp and repeat

steps 4 and 5 for the left-hand headlamp.

7. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS

NON-ADJUSTABLE.

8. Close the hood and turn off the lamps.

TURN SIGNAL CONTROL

• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

INTERIOR LAMPS

Dome lamps and map lamps

The front dome lamp is located overhead between the driver and

passenger seats.

The dome lamp will stay on if the

control is moved to the passenger

side position. When the control is in

the middle position, the lamp will

only come on when a door is

opened. If the control is moved to

the driver’s side position, the lamp

will not come on at all.

OFF

Lights

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 279 280

Pas de commentaire

Ford 2002 Escape v.2 Manuel d'utilisateur Page 71