Ford 2002 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 231)

WINDSHIELD WASHER FLUID

Checking and adding washer fluid

Check the washer fluid whenever

you stop for fuel. The reservoir is

highlighted with a

symbol.

If the level is low, add enough fluid

to fill the reservoir. In very cold

weather, do not fill the reservoir all

the way.

Only use a washer fluid that meets Ford specifications. Refer to

Lubricant specifications in this chapter.

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

Note: Do not put washer fluid in the engine coolant reservoir. Washer

fluid placed in the cooling system may harm engine and cooling system

components.

Checking and adding washer fluid for the liftgate

Washer fluid for the liftgate is supplied by the same reservoir as the

windshield.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance guide for the appropriate intervals

for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait a few minutes for the oil to drain into the

oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P

(Park) (automatic transmissions) or 1 (First) (manual transmissions).

Maintenance and Specifications

231

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 279 280

Pas de commentaire

Ford 2002 Escape v.2 Manuel d'utilisateur Page 231