Ford 2002 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 255)

operating temperature can be reached after approximately 30 km

(20 miles) of driving.

The transmission fluid should be in

the crosshatch zone if at normal

operating temperature (66°C-77°C

[150°F-170°F]).

High fluid level

Fluid levels above the crosshatch

zone may result in transaxle failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transaxle component damage.

If necessary, add fluid in 250 ml (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

Maintenance and Specifications

255

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 279 280

Pas de commentaire

Ford 2002 Escape v.2 Manuel d'utilisateur Page 255