Ford 2012 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 323)

Low fluid level

Do not drive the vehicle if the fluid

level is at the bottom of the dipstick

and the outside temperatures are

above 50°F (10°C).

Correct fluid level

The transmission fluid should be checked at normal operating

temperatures 185°F-200°F (85°C-93°C) on a level surface. The normal

operating temperature can be reached after approximately 20 miles

(30 km) of driving.

The transmission fluid should be in

the zone, identified by the arrows in

this figure, if at normal operating

temperature 185°F-200°F

(85°C-93°C).

High fluid level

Fluid levels above the zone,

identified by the arrows in this

figure, may result in transmission

failure. An overfill condition of

transmission fluid may cause shift

and/or engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick blade. Refer to

Maintenance product specifications and capacities in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint

(250 ml) increments through the

filler tube until the level is correct.

If an overfill occurs, excess fluid should be removed by an authorized

dealer.

DO NOT ADD

ADD (CHECK HOT)

DO NOT ADD

ADD (CHECK HOT)

DO NOT ADD

ADD (CHECK HOT)

DO NOT ADD

ADD (CHECK HOT)

Maintenance and Specifications

323

2012 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 369 370

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Fusion v.3 Manuel d'utilisateur Page 323

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Fusion v.3