Ford 2012 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 319)

100

101

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the MIN/MAX

or upper and lower lines. Do not add fluid if the level is in this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the range between the MIN/MAX or upper and

lower lines. Be sure to put the cap back on the reservoir. Refer to

Maintenance product specifications and capacities in this chapter for

the proper fluid type.

BRAKE/CLUTCH FLUID

Brake and clutch (if equipped) systems are supplied from the same

reservoir.

• 2.5L engine

• 3.0L/3.5L engines

The fluid level will drop slowly as the brakes wear, and will rise when the

brake components are replaced. Fluid levels between the MIN and MAX

lines are within the normal operating range; there is no need to add

fluid. If the fluid levels are outside of the normal operating range, the

performance of the system could be compromised; seek service from

your authorized dealer immediately.

MAX

MIN

Maintenance and Specifications

319

2012 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 369 370

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Fusion v.3 Manuel d'utilisateur Page 319

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Fusion v.3