Ford 2012 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 210)

Starting the engine

1. Turn the key to 3 (on) without

turning the key to 4 (start).

2. Turn the key to 4 (start), then

release the key as soon as the

engine begins cranking. Your vehicle

has a computer assisted cranking

system that assists in starting the

engine. After releasing the key from

the 4 (start) position, the engine may continue cranking for up to

10 seconds or until the vehicle starts.

Note: Cranking may be stopped at any time by turning the key to the off

position.

3. After idling for a few seconds, release the parking brake, apply the

brake, shift into gear and drive.

Note: If the engine does not start on the first try, turn the key to the off

position, wait 10 seconds and try Step 2 again. If the engine still fails to

start, press the accelerator to the floor and try Step 2 again, keeping the

accelerator on the floor until the engine begins to accelerate above

cranking speeds; this will allow the engine to crank with the fuel shut off

in case the engine is flooded with fuel.

Guarding Against Exhaust Fumes

WARNING: If you smell exhaust fumes inside your vehicle, have

this checked immediately. Do not drive your vehicle if you smell

exhaust fumes. Carbon monoxide is present in exhaust fumes. Take

precautions to avoid its dangerous effects.

Important Ventilating Information

If you stop your vehicle and leave the engine idling for long periods of

time, we recommend that you do one of the following:

• Open the windows at least one inch (2.5 cm).

• Set your climate control to outside air.

Driving

210

2012 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 369 370

Pas de commentaire

Ford 2012 Fusion v.3 Manuel d'utilisateur Page 210