Ford 2012 Focus v.5 Manuel d'utilisateur télécharger pdf (Page 343)

100

101

• Do not overfill the engine

with oil. Oil levels above this

mark may cause engine

damage. If the engine is

overfilled, some oil must be

removed from the engine by an

authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

tightly until it is snug.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification

trademark.

Use SAE 5W-20 engine oil

Only use oils certified for gasoline engines by the American Petroleum

Institute (API). An oil with this trademark symbol conforms to the

current engine and emission system protection standards and fuel

Maintenance and Specifications

343

2012 Focus (foc)

Owners Guide, 5th Printing

USA (fus)

1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 406 407

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Focus v.5 Manuel d'utilisateur Page 343

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Focus v.5