Ford 2012 Focus v.5 Manuel d'utilisateur télécharger pdf (Page 289)

When manual zoom is enabled, only

the centerline will be shown.

Rear camera delay

After shifting out of R (Reverse) and into any gear other than P (Park),

the image will remain until the vehicle speed reaches five mph (8 km/h).

This will only occur if the rear camera delay feature is on, or until any

radio button is selected.

The default setting for the rear camera delay is OFF. To turn this feature

on or off when the vehicle is not in R (Reverse), do the following:

1. Select Menu

2. Select Vehicle

3. Select Rear View Camera

The rear camera delay options are ON and OFF.

The camera lens for the reverse camera system is located on the liftgate.

Keep the lens clean so the video image remains clear and undistorted.

Clean the lens with a soft, lint-free cloth and non-abrasive cleaner.

When towing, the reverse camera system will only see what is being towed

behind the vehicle. This might not provide adequate coverage as it usually

provides in normal operation and some objects might not be seen.

Active guidelines, fixed guidelines, visual park aid alert and manual zoom

features are only available when the vehicle is in R (Reverse).

If the vehicle is in R (Reverse) and the liftgate is ajar, no rear video

camera features will be displayed. A message will be displayed on the

touchscreen if the liftgate is ajar.

After activating or deactivating a rear video camera feature, the

touchscreen will show a preview of the feature(s) selected.

Note: If the camera system image is not clear or seems distorted, it may

be covered with water droplets, snow, mud or any other substance. If

this occurs, clean the camera lens before using the camera system.

Zoom

{zoom

level}

Driving

289

2012 Focus (foc)

Owners Guide, 5th Printing

USA (fus)

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 406 407

Pas de commentaire

Ford 2012 Focus v.5 Manuel d'utilisateur Page 289