Ford 2011 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 63)

100

101

5. Carefully pull the bulb out of the

socket and push in the new bulb.

6. Install the bulb socket into the

lamp assembly and rotate clockwise.

Replacing front sidemarker bulbs

For bulb replacement, see your authorized dealer.

Replacing tail/stop/turn/backup lamp bulbs

The tail/stop/turn/sidemarker/backup lamp bulbs are located in the same

portion of the tail lamp assembly, one just below the other. Follow the

same steps to replace either bulb:

1. Make sure the headlamp switch is

in the off position and then open

the liftgate to expose the lamp

assembly screws.

2. Remove the two screws from the

lamp assembly.

3. Carefully remove the lamp

assembly away from the vehicle by

pulling the assembly straight out to

expose the bulb socket. DO NOT

TIP THE LAMP ASSEMBLY SIDEWAYS.

4. Rotate the bulb socket counterclockwise and remove from lamp

assembly.

5. Pull bulb straight out of socket and push in the new bulb.

6. Install the bulb socket into the lamp assembly and rotate clockwise.

7. Carefully install the tail lamp assembly on the vehicle and secure with

two screws.

Lights

2011 Escape (204)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 363 364

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Escape v.2 Manuel d'utilisateur Page 63

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Escape v.2