Ford 2011 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 318)

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick blade. Refer to

Maintenance product specifications and capacities in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 ml) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of transmission fluid may cause shift and/or

engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Checking transmission fluid level for recreational flat tow

operation

Before recreational flat towing your vehicle, the transmission fluid level

may need to be set to a lower level. These guidelines are designed to

prevent damage to your transmission. Before you recreational flat tow,

your fluid level must be verified by an authorized dealer.

This fluid level is within the normal

operating fluid range and does not

require that you have your fluid

level readjusted after recreational

flat tow operation.

See the Tires, Wheels and Loading chapter for more information on

recreational flat towing.

DO NOT ADD

ADD (CHECK HOT)

DO NOT ADD

ADD (CHECK HOT)

Maintenance and Specifications

318

2011 Escape (204)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 363 364

Pas de commentaire

Ford 2011 Escape v.2 Manuel d'utilisateur Page 318