Ford 2011 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 23)

To reset the oil monitoring system to 100% after each oil change,

perform the following:

1. Press and release the SETUP button to display “OIL LIFE XXX%

HOLD RESET = NEW”.

2. Press and hold the RESET button for two seconds and release to reset

the oil life to 100%.

Note: To change oil life 100% value to another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the

RESET button to change the Oil Life Start Value. Each release and press

will reduce the value by 10%.

UNITS

Displays the current units in English or Metric.

Press RESET to change between English and Metric.

AUTOLAMP (if equipped)

This feature keeps your headlights on for up to three minutes after the

ignition is switched off.

Press the RESET control to select the new Autolamp delay values of 0,

10, 20, 30, 60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear, putting the vehicle in motion.

Press RESET to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s

door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn autounlock on or off.

REAR PARK AID (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near

the rear bumper, and functions only when R (Reverse) gear is selected.

Press the RESET button to turn it off or on.

CREATE MYKEY / MYKEY SETUP / CLEAR MYKEY

For more information refer to MyKey™ in the Locks and Security

chapter.

Instrument Cluster

2011 Escape (204)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 363 364

Pas de commentaire

Ford 2011 Escape v.2 Manuel d'utilisateur Page 23