Ford 2011 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 131)

Safety belt height adjustment

Your vehicle has safety belt height

adjustments at the front outboard

seating positions. Adjust the height

of the shoulder belt so the belt rests

across the middle of your shoulder.

To adjust the shoulder belt height,

squeeze and hold the buttons on the

side and slide the height adjuster up

or down. Release the buttons and

pull down on the height adjuster to

make sure it is locked in place.

WARNING: Position the safety belt height adjusters so that the

belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the safety

belt and increase the risk of injury in a collision.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

front passenger seating positions.

The safety belt pretensioners activate during frontal collisions, and in

side collisions and rollovers. A safety belt pretensioner is a device which

tightens the webbing of the lap and shoulder belts in such a way that

they fit more snugly against the body.

WARNING: The driver and front passenger safety belt system

(including retractors, buckles and height adjusters) must be

replaced if the vehicle is involved in a collision that results in

deployment of front airbags, seat-mounted side airbags and Safety

Canopy威 System and safety belt pretensioners.

WARNING: Failure to replace the safety belt assembly under

the above conditions could result in severe personal injuries in

the event of a collision.

Safety belt extension assembly

If the safety belt is too short when fully extended,a9inch(23cm)or

12 inch (31 cm) safety belt extension assembly can be added (part

Seating and Safety Restraints

131

2011 Escape (204)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 363 364

Pas de commentaire

Ford 2011 Escape v.2 Manuel d'utilisateur Page 131