Ford 2010 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 261)

100

101

ABS warning lamp

The ABS lamp in the instrument

cluster momentarily illuminates

when the ignition is turned on. If

the light does not illuminate during

start up, remains on or flashes, the

ABS is disabled due to a malfunction and needs to be serviced.

Even when the ABS is disabled,

normal braking is still effective. If

your BRAKE warning lamp

illuminates with the parking brake

released, have your brake system

serviced immediately.

Parking brake

Apply the parking brake whenever

the vehicle is parked. To set the

parking brake, press the parking

brake pedal down until the pedal

stops.

The BRAKE warning lamp in the

instrument cluster illuminates and

remains illuminated (when the

ignition is turned on) until the

parking brake is released.

WARNING: Always set the parking brake fully and make sure

that the gearshift is securely latched in P (Park).

The parking brake is not recommended to stop a moving vehicle.

However, if the normal brakes fail, the parking brake can be used to stop

your vehicle in an emergency. Since the parking brake applies only the

rear brakes, the vehicle’s stopping distance will increase greatly and the

handling of your vehicle will be adversely affected.

ABS

BRAKE

Driving

261

2010 Flex (471)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 396 397

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Flex v.1 Manuel d'utilisateur Page 261

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Flex v.1