Ford 2010 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 375)

100

101

6. Install the dipstick making sure it is fully seated in the filler tube.

7. Remove the dipstick and inspect the fluid level. The fluid should be in

the designated areas for normal operating temperature.

Low fluid level

Do not drive the vehicle if the fluid

level is at the bottom of the

dipstick.

Correct fluid level

The transmission fluid should be checked at normal operating

temperature 180°F-200°F (82°C-93°C) on a level surface. The normal

operating temperature can be reached after approximately 20 miles

(30 km) of driving.

The transmission fluid should be

within the cross-hatch area if at

normal operating temperature

180°F-200°F (82°C-93°C).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Maintenance product specifications and capacities section in this

chapter.

Maintenance and Specifications

375

2010 Flex (471)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 370 371 372 373 374 375 376 377 378 379 380 ... 396 397

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Flex v.1 Manuel d'utilisateur Page 375

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Flex v.1