Ford 2008 Focus v.3 Manuel d'utilisateur télécharger pdf (Page 244)

Changing the air filter element (Non-PZEV only)

1. Release the clamps that secure

the air filter housing cover.

2. Carefully separate the two halves

of the air filter housing.

3. Remove the air filter element

from the air filter housing.

4. Wipe the air filter housing and

cover clean to remove any dirt or

debris and to ensure good sealing.

5. Install a new air filter element. Be

careful not to crimp the filter element edges between the air filter

housing and cover. This could cause filter damage and allow unfiltered

air to enter the engine if not properly seated.

6. Replace the air filter housing cover and secure the clamps. Be sure

that the air cleaner cover tabs are engaged into the slots of the air

cleaner housing.

Note: Failure to use the correct air filter element may result in severe

engine damage. The customer warranty may be void for any damage to

the engine if the correct air filter element is not used.

MOTORCRAFT PART NUMBERS

Component 2.0L I4 engine

Air filter element FA-1890

Fuel filter FG-1036

Oil filter FL-910

Battery BXT-96R

Temporary mobility kit refill

canister

TA-33

PCV valve

Spark plugs

Non PZEV only: Failure to use the correct air filter element may result

in severe engine damage. The customer warranty may be void for any

damage to the engine if the correct air filter element is not used.

For PZEV, the air filter is designed to last the life of the vehicle. See

your authorized dealer or qualified technician for replacement. The

technician can check the diagnostics system for the possibility of an

excessively dirty air filter.

2008 Focus (foc)

Owners Guide

USA (fus)

Maintenance and Specifications

244

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 257 258

Commentaires sur ces manuels

Pas de commentaire

Ford 2008 Focus v.3 Manuel d'utilisateur Page 244

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2008 Focus v.3