Ford 2008 Focus v.3 Manuel d'utilisateur télécharger pdf (Page 243)

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Checking and adding manual transmission fluid (if equipped)

1. Clean the filler plug.

2. Remove the filler plug and

inspect the fluid level.

3. Fluid level should be at the

bottom of the opening.

4. Add enough fluid through the

filler opening so that the fluid level

is at the bottom of the opening.

5. Install and tighten the fill plug

securely.

Use only fluid that meets Ford specifications. Refer to the Maintenance

product specifications and capacities section in this chapter.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the Motorcraft air filter

element listed. Refer to Motorcraft part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Air filter element (PZEV)

Your vehicle is equipped with a lifetime air filter. The air filter is

designed to last the life of the vehicle. See your authorized dealer or a

qualified technician for replacement. The technician can check the

diagnostics system for the possibility of an excessively dirty air filter.

2008 Focus (foc)

Owners Guide

USA (fus)

Maintenance and Specifications

243

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 257 258

Pas de commentaire

Ford 2008 Focus v.3 Manuel d'utilisateur Page 243