Introduction 4Instrument Cluster 10Warning lights and chimes 10Gauges 14Entertainment Systems 17AM/FM stereo 17AM/FM stereo with CD 19AM/FM stereo cas
WARNING LIGHTS AND CHIMESStandard instrument clusterOptional instrument clusterWarning lights and gauges can alert you to a vehicle condition that may
To operate the heated seats:• Push the indicated side of thecontrol for maximum heat.• Push again to deactivate.• Push the indicated side of thecontro
SAFETY RESTRAINTSPersonal Safety System姟The Personal Safety System娂 provides an improved overall level offrontal crash protection to front seat occupa
Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ
The front passenger sensing system can automatically turn off the frontpassenger airbag and passenger seat-mounted side airbag. The system isdesigned
Determining if the Personal Safety System姟 is operationalThe Personal Safety System娂 uses a warning light in the instrumentcluster or a back-up tone t
It is extremely dangerous to ride in a cargo area, inside oroutside of a vehicle. In a collision, people riding in these areasare more likely to be se
2. To unfasten, push the releasebutton and remove the tongue fromthe buckle.Energy management feature• This vehicle has a safety belt system with an e
Shorten and fasten the belt whennot in use.The front outboard and rear safetyrestraints in the vehicle arecombination lap and shoulder belts.The front
How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt
How to disengage the automatic locking modeFord Motor Company recommends that all passenger safety beltassemblies and attaching hardware should be ins
Check engine: The Check engineindicator light illuminates when theignition is first turned to the ONposition to check the bulb and toindicate whether
Position the safety belt height adjusters so that the belt restsacross the middle of your shoulder. Failure to adjust the safetybelt properly could re
Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war
If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h
The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra
Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate
• The ignition switch is in the OFF position• The driver and front passenger safety belts are unbuckledWhile the design allows you to deactivate your
AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and right
Never place your arm over the air bag module as a deploying airbag can result in serious arm fractures or other injuries.Ford Motor Company recommends
Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear
The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt
Brake system warning light: Toconfirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the ON
The diagnostic module monitors its own internal circuits as well as thesupplemental airbag electrical system wiring (including the impactsensors), the
• a front passenger takes his/her weight off of the seat for a period oftime,For side airbag equipped vehicles, the front passenger sensing systemwill
• Have the person sit upright in the seat, centered on the seat cushion,with the person’s legs comfortably extended.• Restart the vehicle and have the
ObjectsPass Airbag OffIndicator LampPassenger AirbagSmall (i.e. 3 ringbinder, small purse,bottled water)Unlit DisabledMedium (i.e. heavybriefcase, ful
In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit.If the airbag readi
Determining if the system is operationalThe SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Ref
All occupants of the vehicle should always wear their safety beltseven when an airbag SRS is provided.How does the side airbag system work?The design
to inflate in side-impact collisions, not roll-over, rear-impact, frontal ornear-frontal collisions, unless the collision causes sufficient lateraldec
SAFETY RESTRAINTS FOR CHILDRENSee the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag suppleme
Child booster seatsChildren outgrow a typical convertible or toddler seat when they weigh40 lb. (18 kg) and are around 4 years of age. Although the la
Engine oil pressure: Illuminateswhen the oil pressure falls below thenormal range. Check the oil leveland add oil if needed. Refer toEngine oil in the
Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi
Children and booster seats vary widely in size and shape. Choose abooster that keeps the lap belt low and snug across the hips, never upacross the sto
Never use pillows, books, or towels to boost a child. They canslide around and increase the likelihood of injury or death in acollision.SAFETY SEATS F
Ford recommends the use of a child safety seat having a top tetherstrap. Install the child safety seat in a seating position with LATCH andtether anch
2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro
5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a
Attaching child safety seats with tether strapsMost new forward-facing child safety seats include a tether strap whichgoes over the back of the seat a
4. Open the tether anchor cover.5. Clip the tether strap to theanchor as shown.If the tether strap is clippedincorrectly, the child safetyseat may not
Your vehicle has LATCH anchors for child seat installation at the seatingpositions marked with the child seat symbol.The anchors on both sides of thec
If you install a child seat with rigid LATCH attachments, do not tightenthe tether strap enough to lift the child seat off the vehicle seat cushionwhe
Speed control (if equipped):Illuminates when the speed controlis activated. Turns off when thespeed control system is deactivated.Door ajar (if equipp
INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade
The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o
Increasing the inflation pressure beyond this pressure will not increasethe tire’s load carrying capability.• kPa: Kilopascal, a metric unit of air pr
Under-inflation is the most common cause of tire failures andmay result in severe tire cracking, tread separation or ⬙blowout⬙,with unexpected loss of
Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo
Tire wearWhen the tread is worn down to1/16th of an inch (2 mm), tires mustbe replaced to help prevent yourvehicle from skidding andhydroplaning. Buil
This begins with the letters “DOT” and indicates that the tire meets allfederal standards. The next two numbers or letters are the plant codedesignati
4. Use both eye and ear protection.For a mounting pressure more than 20 psi greater than the maximumpressure, a Ford Dealer or other tire service prof
Tire and wheel alignmentA bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your
Note: If your tires show uneven wear ask an authorized dealer to checkfor and correct any wheel misalignment, tire imbalance or mechanicalproblem invo
Speedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature,
4. R: Indicates a “radial” type tire.5. 15: Indicates the wheel or rim diameter in inches. If you change yourwheel size, you will have to purchase new
8. U.S. DOT Tire Identification Number (TIN): This begins with theletters “DOT” and indicates that the tire meets all federal standards. Thenext two n
13. Maximum Permissible Inflation Pressure: Indicates the tiremanufacturers’ maximum permissible pressure and/or the pressure atwhich the maximum load
Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8
SNOW TIRES AND CHAINSSnow tires must be the same size and grade as the tires youcurrently have on your vehicle.The tires on your vehicle have all weat
Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your authorized dealer plus any aftermarketequipment.Payload – is th
Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load
GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S
GCW (Gross Combined Weight) – is the weight of the loaded vehicle(GVW) plus the weight of the fully loaded trailer.GCWR (Gross Combined Weight Rating)
2. Determine the combined weight of the driver and passengers that willbe riding in your vehicle.3. Subtract the combined weight of the driver and pas
Trip odometer: Registers the miles (kilometers) of individual journeys.• Without Message CenterPress and release the button on thecluster to toggle be
1400 – (2 x 220) – (9 x 100) = 1400 – 440 – 900 = 60 lb. Now youhave the load capacity to transport the cement and your friend home.In metric units, t
If you use a rental trailer, follow the instructions that the rental agencygives to you.Do not attach safety chains to the bumper.Trailer brakesElectr
Trailer towing tips• Practice turning, stopping and backing up before starting on a trip toget the feel of the vehicle trailer combination. When turni
Replace the rear axle lubricant any time the axle has been submerged inwater. Rear axle lubricant quantities are not to be checked or changedunless a
STARTINGPositions of the ignition1. OFF/LOCK, shuts off the engineand all accessories/locks thegearshift lever and allows keyremoval.2. ACC, allows th
If you smell exhaust fumes inside your vehicle, have your dealerinspect your vehicle immediately. Do not drive if you smellexhaust fumes.Important saf
5. Turn the key to 3 (ON) withoutturning the key to 4 (START).Some warning lights will briefly illuminate. See Warning lights andchimes in the Instrum
Do not use starting fluid such as ether in the air intake system. Suchfluid could cause immediate explosive damage to the engine and possiblepersonal
BRAKESYour service brakes are self-adjusting. Refer to the scheduledmaintenance information for scheduled maintenance.Occasional brake noise is normal
The ABS operates by detecting theonset of wheel lockup during brakeapplications and compensates forthis tendency. The wheels areprevented from locking
AUDIO SYSTEMSAM/FM stereo (if equipped)1. Seek: Press/ to find thenext strong station down/up thefrequency band.2. Tune: Press/ to manuallychange radi
Parking brake with auto-release (if equipped)Apply the parking brake wheneverthe vehicle is parked.To set the parking brake:1. Move the gearshift to P
If the parking brake fails to releaseafter completing this procedure, usethe manual parking brake releaselever.Pull the lever to manually releasethe p
During Traction Control娂 operation you may hear an electric motor typeof sound coming from the engine compartment and the engine will not“rev-up” when
It is also important to maintain a proper power steering fluid level in thepower steering fluid reservoir:• Do not operate the vehicle with a low powe
This system keeps the rear of your vehicle at a constant level byautomatically adding air or releasing air from the springs.If you exceed the load lim
2. Locate the access plug on theunderside of the steering columncover.3. Remove the access plug using a flat head screwdriver. Insert thescrewdriver i
2. Insert the key and turn it to ACC. Apply the brake pedal and shiftto N (Neutral).When the key is in the ignition and in the ACC position, theautoma
• Depress the brake pedal• Move the gearshift lever into the desired gearTo put your vehicle in P (Park):• Come to a complete stop• Move the gearshift
If your vehicle is equipped with afloor-shift transmission, overdrivecan be deactivated by pressing thetransmission control switch on thegearshift han
• Allows upshifts by moving gearshift lever.• Will not downshift into 1 (First) at high speeds; allows for 1 (First)when vehicle reaches slower speeds
5. Power/volume: Press to turnON/OFF; turn to increase ordecrease volume levels.6. Tone: Press TONE until thedesired level — Bass, Treble, Fadeappears
ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside
Canadian customers refer to your Owner Information Guide forinformation on:• coverage period• exact fuel amounts• towing of your disabled vehicle• eme
• The hazard lights control islocated on top of the steeringcolumn.• Depress hazard lights control toactivate all hazard flasherssimultaneously.• Depr
3. If no fuel leak is apparent, reset the fuel pump shut-off switch bypushing in on the reset button.4. Turn the ignition to the ON position. Pause fo
COLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge50A — — Red Red Red60A — — Blue — Yellow70A — — Tan — Brown80A — — N
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 10A Ignition (START) - Starter relaycoil, DTRS2 7.5A Power mirrors, Door
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description13 10A Ignition (ON) - Anti-lock BrakeSystem (ABS) module, Rear AirSuspensi
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description24 10A Ignition (ON/START) - PassiveAnti-Theft System (PATS)module, Powertr
The high-current fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription1 30A* Ignition switch2 20A* Moon roof, S
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription12 20A* Audio (Subwoofer)25A* Tray lamps (Police vehicles only)13 20A* Instrument pan
AM/FM Stereo Single CD Premium audio system (if equipped)1. CD slot: Insert a CD, label sideup. With the ignition on, the radiowill begin play when a
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription109 20A** ABS module (Valves)110 30A** Wiper module111 50A** Police PDB or Police acc
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription301 Full ISO relay Starter302 Full ISO relay Air compressor (non-Police vehiclesonly)
Dissimilar spare tire/wheel informationFailure to follow these guidelines could result in an increasedrisk of loss of vehicle control, injury or death
For vehicles equipped with 4WD, it is not recommended that the vehiclebe operated in 4WD modes with a temporary emergency spare tire. If4WD operation
Tire change procedureTo help prevent the vehicle from moving when you change a tire,be sure the parking brake is set, then block (in both directions)t
On vehicles equipped withAir Suspension, turn OFFthe Air Suspension switch prior tojacking, hoisting or towing yourvehicle.Refer to Air suspension sys
JACK LOCATIONThe jack location markings can befound on the lower outer edge ofthe body.• Locate the jack locator mark (B)on the body (C) near the tire
11. Remove the jack and fullytighten the lug nuts in the ordershown. Refer to Wheel lug nuttorque specifications later in thischapter for the proper l
JUMP STARTINGThe gases around the battery can explode if exposed to flames,sparks, or lit cigarettes. An explosion could result in injury orvehicle da
Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,
Seating and Safety Restraints 95Seating 95Safety restraints 101Airbags 116Child restraints 128Tires, Wheels and Loading 140Tire information 140Vehicle
5. Eject: Press to eject the CD. Ifthe disc is not removed within theallotted time, the system willautomatically reload the CD and begin play. Note: T
3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex
Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling
Ford Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf you own a Lincoln vehicle and are away f
In the United States, a warranty dispute must be submitted to the BBBAUTO LINE before taking action under the Magnuson-Moss WarrantyAct, or to the ext
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh
UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee
If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio
When activated, AUTOSET will momentarily appear in the display whenany of the preset controls are pressed.Speed sensitive volume: Radio volume changes
ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is
• Wash the vehicle first.• Do not use waxes that contain abrasives; use Motorcraft PremiumLiquid Wax (ZC-53-A), which is available from your authorize
• Take care when using a power washer to clean the engine. Thehigh-pressure fluid could penetrate the sealed parts and causedamage.• Do not spray a ho
WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub
Do not use chemical solvents or strong detergents when cleaningthe steering wheel or instrument panel to avoid contamination ofthe airbag system.• Be
LEATHER SEATS (IF EQUIPPED)Your leather seating surfaces have a clear, protective coating over theleather.• To clean, use a soft cloth with Motorcraft
Motorcraft Engine Shampoo and Degreaser (U.S. only) (ZC-20)Motorcraft Engine Shampoo (Canada only) (CXC-66-A)Motorcraft One Step Wash and Wax Concentr
SERVICE RECOMMENDATIONSTo help you service your vehicle we provide scheduled maintenanceinformation which makes tracking routine service easy.If your
OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under theinstrument panel.2. Go to the front of the vehicle andrelease the
16. SCAN: Press SCAN to hear abrief sampling of radio stations orCD tracks. Press again to stop.Premium/Audiophile Satellite Compatible AM/FM Stereo S
5. Power steering fluid reservoir6. Engine coolant reservoir7. Battery8. Power distribution box9. Engine oil filler cap10. Automatic transmission flui
CHANGING THE WIPER BLADES1. Pull the wiper blade and armaway from the glass. Turn the bladeat a right angle to the arm. Push thelock tab (A) to releas
5. Locate and carefully remove theengine oil level indicator (dipstick).6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.•
• Do not overfill the enginewith oil. Oil levels above thismark may cause enginedamage. If the engine isoverfilled, some oil must beremoved from the e
Use SAE 5W-20 engine oilOnly use oils “Certified For Gasoline Engines” by the AmericanPetroleum Institute (API). An oil with this trademark symbol con
If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neutralize theacid with
4. Allow the engine to idle for at least one minute.5. Turn the A/C on and allow the engine to idle for at least one minute.6. Release the parking bra
Your vehicle was factory-filled with a 50/50 engine coolant and waterconcentration. If the concentration of coolant falls below 40% or above60%, the e
Note: Automotive fluids are not interchangeable; do not use enginecoolant, antifreeze or windshield washer fluid outside of its specifiedfunction and
• Do not add extra inhibitors or additives to the coolant. Thesecan be harmful and compromise the corrosion protection of the enginecoolant.For vehicl
3. BASS: Press BASS; thenpressSEL-TEXT todecrease/increase the level of bassoutput.TREB (Treble): Press TREB; thenpressSEL-TEXT todecrease/increase th
Your cooling system may have a leak. Operating an engine with a lowlevel of coolant can result in engine overheating and possible enginedamage.Recycle
• Decreased engine coolant concentrations below 40% willdecrease the freeze protection characteristics of the enginecoolant and may cause engine damag
When fail-safe mode is activatedYou have limited engine power when in the fail-safe mode, so drive thevehicle with caution. The vehicle will not be ab
If you do not use the proper fuel filler cap, excessive vacuum inthe fuel tank may damage the fuel system or cause the fuel capto disengage in a colli
• FFV fuel tanks may contain zero to 85 percent ethanol. Any fuelblends containing gasoline and ethanol should be treated the same as“Fuel Ethanol ”.
RefuelingFuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others:• Read and follow all the instr
If you must replace the fuel filler cap, replace it with a fuel fillercap that is designed for your vehicle. The customer warranty maybe void for any
Repairs to correct the effects of using a fuel for which your vehicle wasnot designed may not be covered by your warranty.Cleaner airFord endorses the
Unleaded Gasoline enginesIf you are experiencing starting, rough idle or hesitation driveabilityproblems during a cold start, try a different brand of
ESSENTIALS OF GOOD FUEL ECONOMYMeasuring techniquesYour best source of information about actual fuel economy is you, thedriver. You must gather inform
The Federal Communications Commission (FCC) and the Canadian Radioand Telecommunications Commission (CRTC) recommend that FM radiobroadcasters use RDS
2. Each time you fill the tank, record the amount of fuel added (ingallons or liters).3. After at least three to five tank fill-ups, fill the fuel tan
• Warming up a vehicle on cold mornings is not required and mayreduce fuel economy.• Resting your foot on the brake pedal while driving may reduce fue
It is important to note the box in the lower left corner of the windowsticker. These numbers represent the Range of MPG (L/100 km)expected on the vehi
Do not make any unauthorized changes to your vehicle or engine. Bylaw, vehicle owners and anyone who manufactures, repairs, services,sells, leases, tr
Readiness for Inspection/Maintenance (I/M) testingSome state/provincial and local governments may haveInspection/Maintenance (I/M) programs to inspect
POWER STEERING FLUIDCheck the power steering fluid.Refer to scheduled maintenanceinformation for the service intervalschedules. If adding fluid isnece
BRAKE FLUIDThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels below the “MAX” lineth
Low fluid levelDo not drive the vehicle if the fluidlevel is at the bottom of the dipstickand the ambient temperature isabove 50°F (10°C).Correct flui
Adjusting automatic transmission fluid levelsBefore adding any fluid, make sure the correct type is used. The type offluid used is normally indicated
5. Install a new air filter element. Becareful not to crimp the filterelement edges between the air filterhousing and cover. This could causefilter da
Speed sensitive volume: Radio volume changes automatically andslightly with vehicle speed to compensate for road and wind noise.Recommended level is 1
Replace the PCV valve with one that meets Ford material anddesign specifications for your vehicle, such as a Motorcraft orequivalent replacement part.
MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem Capacity Ford part nameFord part number /Ford specificationBrake fluidFill to line onreservoirMo
Item Capacity Ford part nameFord part number /Ford specificationPower steering fluidFill to line onreservoirMotorcraft MERCON威ATFXT-2-QDX /MERCON威Auto
5Ensure the correct automatic transmission fluid is used. Transmission fluid requirements areindicated on the dipstick or on the dipstick handle. MERC
ENGINE DATAEngine 4.6L V8 engine 4.6L FFV V8 engineCubic inches 281 281Required fuel 87 octane 87 octane or Ethanol(E 85)Firing order 1-3-7-2-6-5-4-8
IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli
The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating
GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of
Peace of mindMobile-ease娂 hands-free communication systemRemote startVehicle security systemsWheel locksFor maximum vehicle performance, keep the foll
AABS (see Brakes) ...168Air cleaner filter ...248–249Air conditioning ...34Air suspension ...
12. REW (Rewind): Press torewind in tape or CD mode.FF (Fast forward): Press to fastforward in tape or CD mode.13. SCAN: Press SCAN to hear abrief sam
wiper blades ...214Climate control (see Airconditioning or Heating) ...34Clock adjust6-CD in dash ...
Floor mats ...78Fluid capacities ...251Fuel ...232calcu
positions of the ignition ...164LLampsautolamp system ...37bulb replacementspecifications chart ...41daytime
opening the trunk ...84panic alarm ...84replacement/additionaltransmitters ...
Traction-lok rear axle ...174Transmission ...174brake-shift interlock(BSI) ...174–1
Audiophile AM/FM Satellite Compatible Stereo In-dash Six CDsound system (if equipped)1. CD slot: To insert a CD, pressLOAD. When the system is ready,i
4. MUTE: Press to mute the playingmedia. Press again to return to theplaying media or turn the volumecontrol to adjust the volume.5. Eject: Press to e
9. MENU: Press MENU repeatedlyto access RDS on/off.UseSEL-TEXT to toggleRDS on/off. Press MENU again to access Program type mode or ShowType mode. (ME
Maintenance and Specifications 218Engine compartment 219Engine oil 221Battery 224Engine coolant 226Fuel information 232Air filter(s) 248Part numbers 2
Speed sensitive volume: Radio volume changes automatically andslightly with vehicle speed to compensate for road and wind noise.Recommended level is 1
16. SHUF (Shuffle) /SCAN: Press SCAN to hear a brief sampling ofradio stations or CD tracks on the current CD. Press again to stop.SHUF (Shuffle): Pre
CD/CD player care:Do:• Handle discs by their edges only. Never touch the playing surface.• Inspect discs before playing. Clean only with an approved C
MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature sele
To aid in side window defogging/demisting in cold weather:1. Select NORM A/C.2. Adjust the temperature control to maintain comfort.3. Set the fan spee
3. Fan speed: Turn to manuallyincrease or decrease fan speed.4. Defrost:Distributes outside air through the windshield defrostervents and the side win
• Remove any snow, ice or leaves from the air intake area at the base ofthe windshield.To aid in side window defogging/demisting in cold weather:1. Se
HEADLAMP CONTROLTurns the lamps off.Turns on the parkinglamps, instrument panel lamps,license plate lamps and tail lamps.Turns the headlamps on.Autola
Flash to passPull toward you slightly to activateand release to deactivate.Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a redu
AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident the alignment of yo
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
With overhead consoleWith overhead console and moonroofTo turn on the map lamps, press themap lamp control.Rear courtesy/reading lampsRotate the lens
Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbsmust be marked with an authorized “D.O.T.” for North America an
Overhead console lampsTo remove and replace the lamps in the overhead console:1. Make sure the headlamp switch isin the OFF position and remove theove
6. Without turning, remove the oldbulb from the lamp assembly bygently pulling it straight back out ofthe lamp assembly.To install the new bulb:Handle
5. Disconnect the electricalconnector from the bulb by pullingrearward.6. Rotate the bulb socketcounterclockwise and remove fromlamp assembly.7. Caref
4. Pull the bulb from the socket andpush in the new bulb.5. Install the bulb socket into thelamp assembly by rotating itclockwise.6. Install the lamp
Replacing high-mount brakelamp bulbs1. Remove two screws from thelamp assembly.2. Carefully lift the lamp assemblyup for access to the bulbs.3. Carefu
MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the
TILT STEERING WHEELTo adjust the steering wheel:1. Pull and hold the steering wheelrelease control toward you.2. Move the steering wheel up ordown unt
CENTER CONSOLE (IF EQUIPPED)Your vehicle may be equipped with a variety of console features. Theseinclude:• Utility compartment• Power point (inside s
SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ
3. Press and hold the MODE controluntil VAR appears in the display,then release. The display shouldshow the current zone number.4. Press the MODE cont
3. From a blank display press andrelease the MODE button once. Thedirectional heading will bedisplayed.Note: If the compass isde-calibrated, CAL will
4. Determine which magnetic zoneyou are in by referring to the zonemap.5. Repeatedly press and release theRESET button to scroll through thezones 1–15
4. Press the RESET button tode-calibrate the compass. Thedisplay will read CIRCLE SLOWLYTO CALIBRATE for a few secondsand then display a direction wit
ProgrammingDo not program the HomeLink威 with the vehicle parked in thegarage.Note: Some vehicles may require the ignition switch to be turned to these
3. Simultaneously press and holdboth the HomeLink威 and hand-heldtransmitter button. The messageCHANNEL “X” (1,2 or 3) TRAININGwill appear on the displ
If the indicator light(s) underneath the house icon blink rapidly for twoseconds and then turn to a continuous light, proceed with steps 6through 8 to
Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and release the appropriate HomeLink威 button.Activation will now occur for the
Reprogramming a single HomeLink姞 buttonTo program a device to HomeLink威 using a HomeLink威 button previouslytrained, follow these steps:1. Press and ho
Always keep the power point caps closed when not being used.Cigar/Cigarette lighter (if equipped)Do not plug optional electrical accessories into the
Notice to owners of Severe Duty vehiclesBefore you drive your vehicle, be sure to read the Severe Duty Owner’sGuide supplement. This book contains imp
Window lockThe window lock feature allows onlythe driver to operate the powerwindows.To lock out all the window controlsexcept for the driver’s press
Heated outside mirrors (if equipped)Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated.Do not re
Do not use the speed control in heavy traffic or on roads thatare winding, slippery or unpaved.Setting speed controlThe controls for using your speedc
Resuming a set speedPress the RESUME control andrelease it. This will automaticallyreturn the vehicle to the previouslyset speed. The RESUME control w
• Depress the brake pedal until thedesired vehicle speed is reached,press the SET + control.Turning off speed controlThere are two ways to turn off th
In any mode:• Press VOL + or - to adjust thevolume.Climate control features• Press TEMP + or - to adjusttemperature.MOON ROOF (IF EQUIPPED)Do not let
To vent the moon roof:• Press and hold the controlforward to raise the moon roof tothe vent position (when the glasspanel is closed).To open the moon
Note: Some vehicles may require the ignition switch to be turned to thesecond (or “ACC”) position for programming and/or operation of theHomeLink威. It
Note: If the indicator light blinks rapidly for two seconds and then turnsto a continuous light, proceed with Steps 6 through 8 to completeprogramming
• Proceed with Step 4 in the “Programming” section.Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate
To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access e
MESSAGE CENTER (IF EQUIPPED)With the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle info
ResetPress this control to reset functions shown in the INFO menu andSETUP menu.Info menuThis control displays the following control displays:• Trip o
Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in miles/gallon or liters/100km.If you calculate
Trip elapsed drive timeSelect this function from the INFOmenu to display a timer.To operate the Trip Elapsed DriveTime perform the following:1. Press
The sequence of the system check report and how it appears in themessage center is as follows:1. OIL LIFE— PRESS RESET IF NEW OIL2. WASHER FLUID3. AIR
Language1. Select this function from theSETUP menu for the currentlanguage to be displayed.2. Pressing the SELECT controlcycles the message center thr
• They will not reappear until an ignition OFF-ON cycle has beencompleted.This acts as a reminder that these warning conditions still exist withinthe
LOW FUEL. Displayed as an early reminder of a low fuel condition.Warning message can be reset by pressing the RESET button, but willreturn after 10 mi
2. Press and hold the RESETcontrol for 3 seconds and release.Oil life is set to 100% and “OIL LIFESTART VALUE SET TO XXX%” isdisplayed.POSITIVE RETENT
KEYSThe vehicle is equipped with a master (black) key and valet (gray) keylock system (if equipped with valet feature).• The master key will access th
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag
Smart locks (if equipped)With the key in any ignition position, and either the driver’s orpassenger’s door open, the doors cannot be locked using the
Deactivating/activating the autolock or auto-unlock featureAutomatic door locks can also be turned on/off through the followingprocedure:You must comp
CHILDPROOF DOOR LOCKSWhen these locks are set, the reardoors cannot be opened from theinside. The rear doors can beopened from the outside when thedoo
Keep vehicle doors andluggage compartmentlocked and keep keys and remotetransmitters out of a child’s reach.Unsupervised children could lockthemselves
Unlocking the doors1. Press and release to unlock the driver’s door. Note: The interiorlamps will illuminate.2. Pressand release again within five sec
To replace the battery:1. Twist a thin coin between the twohalves of the remote entrytransmitter near the key ring. DONOT TAKE THE RUBBER COVERAND CIR
• Perform the following programming procedure yourself:Note: Ensure the brake pedal is notdepressed during this sequence.Place the key in the ignition
The battery saver will shut off the interior lamps 30 minutes after thelast door is closed, or after 10 minutes if the last door is left open.Radio ty
2. Within five seconds press 1 • 2 on the keypad to enter theprogramming mode.3. Enter your personal 5-digit code. Each number must be enteredwithin f
2. Press and release 1 • 2 within 5 seconds of step 1.3. Press and hold 1 • 2 for two seconds. All of the vehicle doors will lockand then unlock to co
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng
Radio type approval numbers for Immobiliser System PATS XCVRIf the type approval of your immobilizer system is inspected in one of thecountries listed
Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment.Your ve
Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the 1(OFF/LOCK) position.The theft indicator on theinstrument panel wi
1. Insert the first previouslyprogrammed coded key into theignition and turn the ignition from 1(OFF/LOCK) to the 3 (ON) position(maintain ignition in
Arming the systemWhen armed, the perimeter alarm will notify you of an unauthorizedentry. When unauthorized entry occurs, the system will flash the pa
SEATINGAdjustable head restraintsHead restraints help to limit head motion in the event of a rear collision.To properly adjust your head restraints, l
Lift handle to move seat forward orbackward.Pull lever up to adjust seatback.Before returning theseatback to its originalposition, make sure that carg
To adjust the front seatback usingthe manual recliner:• Lift and hold the handle locatedon the side of the seat.• Lean against the seatback toadjust i
To reduce the risk of possible serious injury: Do not hang objectsoff seat back or stow objects in map pocket (if equipped) whena child is in the fron
Press to move the front portion ofthe seat cushion up or down.Press to move the rear portion ofthe seat cushion up or down.Using the power lumbar supp
Commentaires sur ces manuels