Ford 2004 Taurus v.3 Manuel d'utilisateur Page 84

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 248
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 83
When the ignition is in the 4 (ON) position, the indicator will glow for
3 seconds, then turn off to indicate normal system functionality.
If a problem occurs with the SecuriLock system, the indicator will flash
rapidly or glow steadily when the ignition is in the 4 (ON) position. If this
occurs, the vehicle should be taken to an authorized dealer for service.
Automatic arming
The vehicle is armed immediately
after switching the ignition to the 3
(OFF) position.
The
THEFT
indicator will flash
every two seconds when the vehicle
is armed.
Automatic disarming
Switching the ignition to the 4 (ON) position with a coded key disarms
the vehicle.
The
THEFT
indicator will illuminate for three seconds and then go out.
If the
THEFT
indicator stays on for an extended period of time or
flashes rapidly, have the system serviced by your dealer.
Replacement keys
If your keys are lost or stolen and you dont have an extra coded key, you will
need to have your vehicle towed to a dealership. The key codes need to be
erased from your vehicle and new coded keys will need to be programmed.
Replacing coded keys can be very costly. Store an extra programmed key
away from the vehicle in a safe place to help prevent any
inconveniences. Please visit an authorized dealer to purchase additional
spare or replacement keys.
Programming spare keys
You can program your own coded keys to your vehicle. Please read and
understand the entire procedure before you begin.
Tips:
A maximum of eight keys can be coded to your vehicle.
Only use Securilock keys.
You must have two previously programmed coded keys (keys that
already operate your vehicles engine) and the new unprogrammed
key(s) readily accessible.
3
4
1
2
5
2004 Taurus (tau)
Owners Guide (post-2002-fmt)
USA English (fus)
Locks and Security
84
Vue de la page 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 247 248

Commentaires sur ces manuels

Pas de commentaire