Ford 2004 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 215)

7. Remove the dipstick and inspect the fluid level. The fluid should be in

the designated areas for normal operating temperature.

Low fluid level

Do not drive the vehicle if the fluid

level is at the bottom of the dipstick

and the outside temperatures are

above 10°C (50°F).

Correct fluid level

The transmission fluid should be checked at normal operating

temperatures 66°C-77°C (150°F-170°F) on a level surface. The normal

operating temperature can be reached after approximately 30 km (20

miles) of driving.

The transmission fluid should be in

this range if at normal operating

temperature (66°C-77°C

[150°F-170°F]).

High fluid level

Fluid levels above the safe range

may result in transaxle failure. An

overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transaxle component damage.

If necessary, add fluid in 250 mL (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause shift and/or engagement concerns

and/or possible damage.

DON’ T ADD IF IN CROSSHATCH AREA--CHECH WHEN HOT-IDLING

2004 Taurus (tau)

Owners Guide (post-2002-fmt)

USA English (fus)

Maintenance and Specifications

215

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 247 248

Commentaires sur ces manuels

Pas de commentaire

Ford 2004 Taurus v.3 Manuel d'utilisateur Page 215

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2004 Taurus v.3